Month: July 2016
Welcome to download the newest Pass4itsure 70-247 VCE dumps: https://www.pass4itsure.com/70-247.html
Yet another key function that makes Flydumps worth Adobe 9A0-092 exam sample questions vital is the fact that is has all Adobe 9A0-092 simulation in it which is very important. These Adobe 9A0-092 within the Flydumps worth Adobe 9A0-092 exam sample questions has elevated its value for passing Adobe 9A0-092 check with best ranks. Adobe 9A0-092 exam sample questions will provide you with Adobe 9A0-092 examination queries with confirmed answers that reflect the real examination. These Adobe 9A0-092 questions and answers present you together with the expertise of using the actual check.
QUESTION 42
Which statement about animation in Flash CS4 is true?
A. A layer with a Motion Tween can contain multiple objects
B. Shape Tweens are no longer supported in Flash CS4
C. Objects can animate on x, y, and z axis
D. Runtime armatures can be animated in the timeline
Correct Answer: C QUESTION 43
Which two color effects can be used to change transparency? (Choose two)
A. None
B. Brightness
C. Tint
D. Alpha
E. Advanced
Correct Answer: DE QUESTION 44
Which statement about shape tweens is true?
A. A light blue arrow in the timeline denotes a shape tween.
B. You must have at least 2 keyframes in order to create a shape tween.
C. Only 1 keyframe is needed. TestInside Help You Pass Any IT Exam http://www.TestInside.com Testinside
D. Each keyframe must contain symbols.
Correct Answer: B QUESTION 45
Which button state should you use to create an invisible button?
A. Up
B. Over
C. Down
D. Hit
Correct Answer: D QUESTION 46
Which statement about motion tweens is true?
A. A light green arrow in the timeline denotes a motion tween.
B. You must have at least 2 keyframes in order to create a motion tween.
C. Only 1 keyframe is needed.
D. Each keyframe cannot contain symbols.
Correct Answer: B QUESTION 47
You are able to set a property in the Motion Editor, but you are NOT able to adjust the same property
using a graph in the Motion Editor.
Why does this happen?
A. The property cannot be tweened because it can have only one value for the life of the object in the Timeline.
B. The property has not been tweened properly and needs to be edited on the Stage.
C. The property has a custom ease curve applied to it.
D. You are attempting to exceed a minimum or maximum allowable value for the property.
Correct Answer: A QUESTION 48
Which property can be edited by adjusting a Bezier curve in the Motion Editor?
A. the Quality property of the Gradient Bevel filter
B. the X-position property of a graphic symbol TestInside Help You Pass Any IT Exam http://www.TestInside.com Testinside
C. the Z-position property of a movie clip symbol
D. the Scale X property of a button symbol.
Correct Answer: D QUESTION 49
When should you use the Motion Editor?
A. When you want to edit a single Motion Tween
B. When you want to view multiple Motion Tweens
C. When you want to edit both Motion and Shape Tween
D. When you want to replace an object in the animation
Correct Answer: A QUESTION 50
What does the Motion Editor allow you to do?
A. Finely control animations of movie clips.
B. Finely control keyframes on a timeline.
C. Finely control the tweening of individual properties.
D. Finely control skins and styles of components.
Correct Answer: C QUESTION 51
Which two tasks can you complete by using the Motion Editor panel? (Choose two.)
A. Add motion tweens.
B. Add shape tweens.
C. Set the value of individual property keyframes.
D. Create custom ease curves.
E. Add or remove frames.
Correct Answer: CD
QUESTION 52
Which statement about Motion Presets is true?
A. You can apply more than one Motion Preset to a symbol.
B. Classic tweens can be saved as Motion Presets.
C. You can create your own custom Motion Presets. TestInside Help You Pass Any IT Exam http://www.TestInside.com Testinside
D. Motion Presets can contain any type of tween.
Correct Answer: C
QUESTION 53
Which statement about Motion Presets is true?
A. Motion Presets are pre-configured motion tweens.
B. Motion Presets are pre-configured shape tweens.
C. Motion Presets can be both pre-configured motion tweens and shape tweens.
D. Motion Presets are a new type of tween.
Correct Answer: A
QUESTION 54
How do you export a Motion Preset?
A. Select the preset on the Timeline and choose File > Export > Export Movie.
B. Select the preset on the Stage and choose File > Export > Export Movie.
C. Select the preset in the Properties panel and choose File > Export > Export Movie.
D. Select the preset in the Motions Preset panel and choose Export from the panel menu.
Correct Answer: D
QUESTION 55
In which file format can Motion Presets can be exported?
A. SWC
B. SWF
C. FLV
D. XML
Correct Answer: D
QUESTION 56
Which two sound file formats can be imported into Adobe Flash CS4? (Choose two.)
A. MP3
B. OGG
C. ASND D. GSM
E. RA TestInside Help You Pass Any IT Exam http://www.TestInside.com Testinside
Correct Answer: AC
QUESTION 57
You want to synchronize sound to the occurrence of an event; however, if the sound is already playing
you do NOT want a new instance of the sound to play.
Which sound synchronization option should you choose?
A. Event
B. Start
C. Stop
D. Stream
Correct Answer: B QUESTION 58
What happens when you import audio into a Flash movie?
A. It can be added to a movie clip, graphic or button symbol.
B. It is compressed as an MP3 by default when published.
C. It must be added to a frame in a timeline to be played.
D. It must be added to a symbol to be played.
Correct Answer: B QUESTION 59
In which situation should you use ADPCM sound compression?
A. For short sounds.
B. For long playing sounds.
C. For extremely short playing sounds.
D. For voice-overs.
Correct Answer: A QUESTION 60
Which two objects can have filters applied to them? (Choose two)
A. MovieClip
B. Vector Graphics
C. Graphic Symbol
D. TextField TestInside Help You Pass Any IT Exam http://www.TestInside.com Testinside
E. Shape
Correct Answer: AD QUESTION 61
You want to add a blur filter to a movie clip.
What should you do?
A. Select the movie clip on the Stage and select Blur from the Add filter icon from the Properties panel
B. Select the movie clip in the Library and select Blur from the Add filter icon from the Properties panel
C. Double-click the movie clip on the Stage and select Blur from the Add filter icon from the Properties panel
D. Right-click (Ctrl-click) the movie clip on the Stage and select Edit
Correct Answer: A QUESTION 62
You want to apply a blur effect to your text. What should you do?
A. Convert the text to a symbol then apply the blur filter using the Add Filter option within the Property panel
B. Select the text then apply the blur filter using the Add Filter option within the Property panel
C. Convert the text to device fonts then apply the blur filter using the Add Filter option within the Property panel
D. Break apart the text, then apply the blur filter using the Add Filter option within the Property panel
Correct Answer: B QUESTION 63
You want to add a drop shadow filter to a movie clip. What should you do?
A. Double-click the movie clip on the Stage and select Drop Shadow from the Add filter icon from the Properties panel
B. Select the movie clip in the Library and select Drop Shadow from the Add filter icon from the Properties panel
C. Select the movie clip on the Stage and select Drop Shadow from the Add filter icon from the Properties panel
D. Right-click (Ctrl-click) the movie clip on the Stage and select Edit
Correct Answer: C QUESTION 64
Which is a best practice when it comes to managing file size of external bitmap files?
A. Compress the bitmap file size and dimensions outside of Flash and then bring it onto Flash.
B. Bring the bitmap file into Flash and then reduce the JPEG quality within the Publish Settings dialog box.
C. Bring the bitmap file into Flash and then reduce the dimensions using the Free Transform tool.
D. Bring the bitmap file into Flash and then select Modify > Bitmap > Trace Bitmap.
Correct Answer: A QUESTION 65
Which two bitmap techniques are helpful when managing performance? (Choose two.)
A. Grouping bitmap layers together.
B. Minimizing the use of transparency in PNG files.
C. Using transparency as much as possible.
D. Minimizing the use of vector assets.
E. Utilizing curves rather than corners whenever possible.
Correct Answer: AB QUESTION 66
Click the Exhibit button.
Which layer is used to hold an inverse kinematics armature?
A. Layer1
B. Layer2
C. Layer3
D. Layer4
Correct Answer: B QUESTION 67
You want to select all of the bones in an inverse kinematics armature.
What should you do?
TestInside Help You Pass Any IT Exam http://www.TestInside.com Testinside
A. double-click a bone with the Selection tool
B. double-click a bone with the Bone tool
C. Control+click (Windows) or Command-click (Mac OS) a bone with the Selection tool
D. Control+click (Windows) or Command-click (Mac OS) a bone with the Bone tool
Correct Answer: A
Flydumps.com Adobe 9A0-092 material details are researched and created by the most professional certified authors who are regularly using current exams experience to create precise and logical dumps. You can get questions and answers from many other websites or books, but logic is the main key of success. And Flydumps.com will give you this key of success.
Pass4itsure 70-247 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/70-247.html
Welcome to download the newest Pass4itsure c2090-610 VCE dumps: http://www.pass4itsure.com/c2090-610.html
We are committed on providing you with the latest and most accurate Adobe 9A0-041 exam preparation products.If you want to pass Adobe 9A0-041 exam successfully, do not miss to read latest Adobe 9A0-041 on Flydumps.
QUESTION 71
Your are using RGB logos and want to maintain the intensity of the colors in your PDF document. When managing color in a PDF document using the Color panel of the Adobe PDF Settings dialog, which Document Rendering Intent is most suitable for accurate color proofing?
A. Saturation
B. Relative Colorimetric
C. Perceptual
D. Absolute Colorimetric
Correct Answer: A
QUESTION 72
What should you do to open a PDF document that contains specific text?
A. choose Edit > Find, type the text and click Next
B. choose Edit > Find, type the text and click Previous
C. choose Edit > Search, type the text and select the option to search all PDF documents in a designated folder, then click the Search button
D. choose Edit > Search, type the text, select the option to search in the current PDF document, then click the Search button
Correct Answer: C QUESTION 73
What does the Output Preview panel color warning highlight if the Show Overprinting option is selected?
A. objects that will print on top of each other instead of knocking out
B. sections of the page that contain objects that are too close to the edge of the press sheet
C. areas where CMYK color and spot colors touch and therefore require trapping
D. areas where the ink is too dense
Correct Answer: A QUESTION 74
Which preflight feature allows you to preflight your file against the PDF settings of a print service provider?
A. PDF/X
B. import of a profile
C. validation
D. import of an FDF
Correct Answer: B QUESTION 75
You have run the Full Check Accessibility command on a tagged PDF document. The report indicates that one of the figures does NOT have alternate text applied. How should you add the alternate text?
A. choose Advanced > Accessibility > Change Reading Options
B. in the Tags pane, Control-click (Mac OS) or right-click (Windows) on the figure tag and select Properties
C. in the Tags pane, Control-click (Mac OS) or right-click (Windows) on the figure tag and select Tag Annotations
D. Control-click (Mac OS) or right-click (Windows) on the figure and select Add Note
Correct Answer: B QUESTION 76
Which preflight feature allows you to preflight your file against the PDF settings of a print service provider?
A. import of an FDF
B. import of a profile
C. PDF/X
D. validation
Correct Answer: B QUESTION 77
You are creating a PDF document for print. The job will be printed at 133 lines per inch on a sheet-feed offset press. Which sampling values should you use for monochrome images in the Images panel of the Adobe PDF Settings dialog box?
A. 300 pixels per inch for images above 800 pixels per inch
B. 1200 pixels per inch for images above 1800 pixels per inch
C. 133 pixels per inch for images above 800 pixels per inch
D. 133 pixels per inch for images above 300 pixels per inch
Correct Answer: B QUESTION 78
Which icon takes you to the Home page of the How To window?
A. A
B. B
C. C
D. D
Correct Answer: A
QUESTION 79
Which type of security policy allows individuals to limit the time period within which access to a PDF document is allowed?
A. public key certificate security policy
B. password security policy
C. user security policy on an Adobe Policy Server
D. organizational security policy on an Adobe Policy Server
Correct Answer: C
QUESTION 80
What does the Emit Printer Marks setting in the Marks and Bleeds panel of the Advanced Printer Setup dialog do?
A. specifies the cropbox size
B. uses the printer marks embedded in the Adobe PDF file
C. determines the weight of printer mark lines
D. creates all printer marks at once
Correct Answer: B
QUESTION 81
You are about to submit a PDF document to a print vendor. The document uses full-color images. You notice that the document contains three spot colors. This should be a four-color process job, and you do NOT have the original files. What should you do?
A. use the Ink Manager to alias all spot colors to process simulations
B. ask the print vendor to combine the spot plates to one of the process plates at print time with Acrobat
C. use the Preflight tool to convert the job to a process-color job
D. redistill the file and convert all colors to CMYK with Distiller
Correct Answer: A
QUESTION 82
Which mark is necessary if your project includes bleeds?
A. bleed
B. trim
C. registration
D. page information
Correct Answer: B
QUESTION 83
Which Preflight Report option allows you to highlight problem areas with a transparent mask?
A. XML Report
B. Text Report
C. Insert Preflight Results As Comments
D. PDF Report
Correct Answer: D
QUESTION 84
Which preflight problem would cause failure during validation for the digital press (color) profile?
A. Object uses CMYK.
B. Document images are on CMY plates.
C. PDF/X label is missing or incorrect.
D. PDF version is newer than 1.2.
Correct Answer: C
QUESTION 85
You have created a four-color brochure. It needs to be sent to a commercial printing company for reproduction, and the printer has required that you build all necessary elements for printing (e.g., fonts and graphics) into a PDF document. Which Acrobat Distiller job option should you choose?
A. Smallest File Size
B. High Quality Print
C. Standard
D. Press Quality
Correct Answer: D
QUESTION 86
You want to determine if the number of printing plates that will be generated from a PDF document will exceed a certain number. What should you do?
A. create a batch sequence with a Preflight command
B. create a preflight profile and assign a condition in the Document Property group
C. create a preflight profile and assign a condition in the Colors Property group
D. create a batch sequence with a Number Pages command
Correct Answer: C
QUESTION 87
Which mark is necessary if your project includes bleeds?
A. page information
B. trim
C. bleed
D. registration
Correct Answer: B
QUESTION 88
Which part of a digital ID is shared with others to verify the digital signature of the person who created the document?
A. public certificate
B. certificate authority
C. PKCS#12 file
D. private key
Correct Answer: A
QUESTION 89
You want to add a page number to the footer on all but the first page of your PDF document. The first page is an odd numbered page. Which option in the Page Options section of the Add Headers & Footers dialog box should you choose?
A. Apply to Page Range
B. Odd Pages Only
C. Even Pages Only
D. Apply to All Pages
Correct Answer: A
QUESTION 90
Your PDF document contains a chart. You want to include the original source document for this chart as a reference. What should you do?
A. select the Attachments pane, click on the Add button and select the appropriate document
B. select the Attachments pane, choose Options > Open Attachment
C. choose Document > Compare Documents and choose the appropriate file
D. choose Advanced > Links
Correct Answer: A
QUESTION 91
You want to create a comment that draws a text box directly on the page. Which commenting tool should you use?
A. Text Box tool
B. Pencil tool
C. Select tool
D. Note tool
Correct Answer: A
QUESTION 92
What is the purpose of the Simulation Profile setting in the Output Preview dialog box?
A. to describe the target output device
B. to highlight warning areas for color problems
C. to identify the color space used in the PDF
D. to specify how overprinting will be handled in the resulting PDF
Correct Answer: A QUESTION 93
You have several PDF documents that are located in different folders. You want to be able to access these documents from a single location without copying or moving them.
Which feature of the Organizer allows you to do this?
A. Favorite Places
B. History
C. Pages pane
D. Collections
Correct Answer: D QUESTION 94
You have run the Full Check Accessibility command on a tagged PDF document. The report indicates that one of the figures does NOT have alternate text applied. How should you add the alternate text?
A. Control-click (Mac OS) or right-click (Windows) on the figure and select Add Note
B. in the Tags pane, Control-click (Mac OS) or right-click (Windows) on the figure tag and select Properties
C. choose Advanced > Accessibility > Change Reading Options
D. in the Tags pane, Control-click (Mac OS) or right-click (Windows) on the figure tag and select Tag Annotations
Correct Answer: B QUESTION 95
You want to add a bookmark to a PDF document. What should you do?
A. select the Pages pane, select the desired page, choose Options > Page Properties
B. select the Bookmark pane, click the Create New Bookmark button, then change to the desired view
C. choose Edit > Add Bookmark, then change to the desired view
D. set the desired view, select the Bookmark pane, then click the Create New Bookmark button
Correct Answer: D QUESTION 96
You want to attach a file to your PDF document so that a user can open the attached file by clicking on an icon that displays in a specific location on a page. What should you do?
A. create a link with an action of Go to Page View
B. click the Attach a File icon in the toolbar
C. click the Attach a File as a Comment icon in the Commenting toolbar
D. create an envelope
Correct Answer: C QUESTION 97
What does dragging PDF documents onto a preflight droplet allow you to do?
A. create multiple preflight profiles
B. send multiple files to an output device
C. inspect multiple PDF documents for problem areas
D. convert multiple file types to PDF Correct Answer: C
QUESTION 98
Which kind of PDF document should be created by using the PDF/A (Draft) specification?
A. documents being stored in a digital archive
B. graphics project files for proofing
C. files that need to be as small as possible
D. files that need to be locked against changes
Correct Answer: A QUESTION 99
You are using Distiller to create the smallest appropriate PDF document for high-end imaging. In the Images panel, which resampling option should you use to obtain the smoothest tonal gradations?
A. Subsampling
B. Average Downsampling
C. Off
D. Bicubic Downsampling
Correct Answer: D QUESTION 100
Your PDF document contains text and transparent objects that overlap. When printed, the text is rasterized. What should you do from the Flattener Preview dialog box to correct the problem when the document is printed?
A. raise the Line Art and Text resolution
B. raise the Gradient and Mesh resolution
C. deselect Clip Complex Regions
D. move the Raster/Vector balance more towards Vectors
Correct Answer: D QUESTION 101
Which statement about setting up a browser-based review is true?
A. New comments are stored in the FDF file.
B. Comments uploaded with the document are editable.
C. New comments are stored in the PDF file.
D. The location of the FDF file that contains the review comments must be in the same location where the review document is stored.
Correct Answer: A QUESTION 102
You choose File > Create PDF > From Scanner. You select Searchable Image as the PDF Output Style from the Recognize Text Settings dialog box. Which statement about the resulting PDF document is true?
A. Graphic elements are removed.
B. The page is unchanged.
C. The appearance of the page may change.
D. You are able to select text.
Correct Answer: D QUESTION 103
What should you do to remove a section of your document and use it as a separate PDF file?
A. choose File > Create PDF > From File
B. choose Document > Replace Pages
C. choose Document > Extract Pages
D. choose Document > Delete Pages
Correct Answer: C
QUESTION 104
Which is searched by default in a PDF document by using either the Find toolbar or the Search PDF window?
A. document properties
B. XMP metadata
C. form fields
D. object data
Correct Answer: C
QUESTION 105
You have set the background color of pages and the color of text by using the Preferences dialog box while a PDF document is open. Which do these specifications affect?
A. your view of all PDF documents
B. the view of the PDF documents any user will see on any system
C. your view of the PDF document
D. the printing of the PDF document
Correct Answer: A
QUESTION 106
Which Preflight Report option allows you to highlight problem areas with a transparent mask?
A. PDF Report
B. Text Report
C. XML Report
D. Insert Preflight Results As Comments
Correct Answer: A
QUESTION 107
When should you select Simulate Ink Black in the Output Preview palette?
A. when you need to change the density of the ink you want to print based on the paper onto which you are printing
B. after converting from RGB to CMYK, to see if the black uses black ink only
C. when black objects overprint objects of other colors, so you can see the effect of the mix
D. when you want to see the effect that a certain paper or printing method might have on the black ink on a job based on a Simulationn Profile
Correct Answer: D
QUESTION 108
You are using the Flattener Preview dialog box. Which condition does Convert All Strokes to Outlines improve?
A. increased thicknesses of thin strokes
B. slow performance when flattening
C. inconsistent line widths on stroked objects
D. disappearing hairlines
Correct Answer: C QUESTION 109
Which statement about the relationship between the Adobe PDF printer and Distiller is true?
A. Distiller and the Adobe PDF printer have different functions.
B. The Adobe PDF printer and Distiller operate independently.
C. The Adobe PDF printer uses Distiller to create PDF files.
D. Distiller uses the Adobe PDF printer to create PDF files.
Correct Answer: C QUESTION 110
Which technique generates a tagged PDF document?
A. choose File > Print > Adobe PDF
B. choose Create PDF > From Clipboard Image
C. use PDFMaker from a Microsoft Office application
D. convert a PostScript file using Acrobat Distiller
Correct Answer: C QUESTION 111
What happens when you select Optimize for Fast Web View in the File Options section of the General panel in Distiller?
A. Thumbnails are generated.
B. Color photographs are downsampled.
C. The PDF file is structured.
D. The Postscript file’s resolution is queried.
Correct Answer: C QUESTION 112
You have selected Allow Fast Web View as an option for viewing PDF documents in a Web browser. What must you do to continue downloading the entire PDF document in the background while you view the first page of requested information?
A. force offscreen compositing even under Terminal Service
B. use inline AutoComplete
C. allow speculative downloading in the background
D. choose LAN from the Connection speed pop-up menu
Correct Answer: C QUESTION 113
You want to create a profile for your specific press conditions. You can accept PDF/X-3 files. Which profile should you use?
A. a custom profile based on PDF/X-3 that also checks for trapping
B. the default PDF/X-3:2001 profile
C. a custom profile based on PDF/X-3 that also checks resolution
D. the default PDF/X-3:2003 profile Correct Answer: C
QUESTION 114
How can you add a signature field to a PDF document so that another person can sign it?
A. choose Document > Digital Signatures > Sign this Document
B. choose Document > Digital Signatures > Validate Signature
C. choose Document > Digital Signatures > Create a Blank Signature Field
D. choose Document > Digital Signatures > Validate All Signatures in Document
Correct Answer: C QUESTION 115
When should you change the default value for resolution in the Adobe PDF Settings dialog box of Distiller?
A. when you want to emulate a printer of a certain resolution
B. when you need to change the pixel size of embedded images
C. when you want to improve the compatibility of Distiller
D. when you need to set resolution of the flattening used for transparent objects
Correct Answer: A QUESTION 116
Which statement about the relationship between the Adobe PDF printer and Distiller is true?
A. Distiller uses the Adobe PDF printer to create PDF files.
B. Distiller and the Adobe PDF printer have different functions.
C. The Adobe PDF printer and Distiller operate independently.
D. The Adobe PDF printer uses Distiller to create PDF files.
Correct Answer: D QUESTION 117
Which is changed when you select Simulate Paper White in a PDF document?
A. the color model used in the file, based on the Simulation Profile used in the Output Preview
B. the density of the colors in the file, based on the paper used for the job
C. the appearance of the white areas in the file to better represent the look of the paper used in the job
D. the amount of color added to the solid black areas of the file
Correct Answer: C QUESTION 118
What should you do to initiate a browser-based review of a PDF document?
A. copy the PDF document to a folder on your hard drive
B. attach the PDF document to an email and send it to the reviewers
C. upload the PDF document to a WebDAV server
D. create a link on a Web page to the PDF document
Correct Answer: C QUESTION 119
You want to change the section of a PDF document that is being displayed in the Loupe Tool window while maintaining the current magnification factor. What should you do?
A. hold down the spacebar while clicking in the Loupe Tool window to drag the display within the Loupe Tool window
B. move the rectangular marquee displayed in the document
C. move the rectangular marquee displayed within the Loupe Tool window
D. right-click (Windows) or Control-click (Mac OS) in the Loupe Tool window; scroll the display within the Loupe Tool window
Correct Answer: B QUESTION 120
Which is a difference between PDF/X-1a files and PDF/X-3 files?
A. PDF/X-1a files CANNOT include spot colors.
B. PDF/X-3 files do NOT need to include a trapping key.
C. PDF/X-3 files require RGB color.
D. PDF/X-1a files CANNOT include ICC profiles.
Correct Answer: D QUESTION 121
You want to print only a portion of a PDF document page.
Which tool should you use to drag around the area you want to print?
A. A
B. B
C. C
D. D
Correct Answer: A
QUESTION 122
You want to create a comment that draws a text box directly on the page. Which commenting tool should you use?
A. Pencil tool
B. Note tool
C. Select tool
D. Text Box tool
Correct Answer: D QUESTION 123
You want to reduce the file size of an existing PDF document with images that consist of color photos. You choose Advanced > PDF Optimizer. Which option should you choose from the Compression pull-down menu in the Images Settings panel?
A. ZIP
B. JPEG
C. Retain existing
D. CCITT Group 4
Correct Answer: B QUESTION 124
What happens when you select Optimize for Fast Web View in the File Options section of the General panel in Distiller?
A. Color photographs are downsampled.
B. The PDF file is structured.
C. Thumbnails are generated.
D. The Postscript file’s resolution is queried.
Correct Answer: B QUESTION 125
What does the Emit Printer Marks setting in the Marks and Bleeds panel of the Advanced Printer Setup dialog do?
A. specifies the cropbox size
B. creates all printer marks at once
C. uses the printer marks embedded in the Adobe PDF file
D. determines the weight of printer mark lines
Correct Answer: C QUESTION 126
You have created an Adobe PDF document without embedding your fonts into the file.
What happens when a user, who does NOT have the fonts used to create the PDF document, opens the PDF document?
A. The user will receive an alert stating that the fonts are missing and the file will close.
B. Adobe Acrobat or Adobe Reader will substitute the fonts with the AdobeSerifMM and AdobeSansMM fonts.
C. The user’s preferred system fonts will be used to display the file.
D. Helvetica, Arial, or Times will be automatically substituted for the missing fonts.
Correct Answer: B QUESTION 127
What should you do to remove a section of your document and use it as a separate PDF file?
A. choose Document > Extract Pages
B. choose Document > Delete Pages
C. choose File > Create PDF > From File
D. choose Document > Replace Pages
Correct Answer: A QUESTION 128
Which option are you able to view when choosing Separations as a Preview option from the Output Preview dialog box?
A. trapping
B. how objects on hidden layers will separate
C. rich black
D. areas where Total Area Coverage exceeds your press limit
Correct Answer: D QUESTION 129
You create a PostScript file that will be converted into a PDF document. You choose to embed the fonts into the PostScript stream. Which statement about the fonts embedded into the PDF document is true?
A. They are NEVER embedded because they CANNOT be embedded in PostScript and PDF.
B. They are always embedded because they are embedded in PostScript.
C. They are only embedded if the fonts are TrueType or PostScript Type 1.
D. They are only embedded if you select Embed All Fonts in the Adobe PDF setting’s Fonts tab.
Correct Answer: D QUESTION 130
You have created an Adobe Acrobat document. Due to the settings of your font vendor, some of your fonts have NOT been embedded. You give the PDF document to two
co-workers who do NOT have the original font installed on their computers. What happens when they print your document?
A. A Multiple Master typeface will be temporarily substituted.
B. They will be asked to choose a font to be substituted during printing.
C. The document will NOT print due to a PostScript error.
D. The original font will print as a low resolution bitmapped font.
Correct Answer: A QUESTION 131
How can you change a split screen view to a single pane view?
A. Document > Set Page Transitions
B. Window > Remove Split
C. View > Actual Size
D. Window > Spreadsheet Split Correct Answer: B
Flydumps only provides Adobe 9A0-041 Practice Exams with highest quality for the candidates,because all Adobe 9A0-041 questions are written by most experienced experts who are really responsible.
Pass4itsure c2090-610 dumps with PDF + Premium VCE + VCE Simulator: http://www.pass4itsure.com/c2090-610.html
Welcome to download the newest Pass4itsure 1z0-060 VCE dumps: http://www.pass4itsure.com/1z1-060.html
At Flydumps,we are positive that our Adobe 9A0-040 preparation material with questions and answers pdf provide most in-depth solutions for individuals that are preparing for the Adobe 9A0-040 exam.Our uodated Adobe 9A0-040 Dumps will allow you the opportunity to know exactly what to expect on the exam day and ensure that you can pass the exam beyond any doubt.
QUESTION 111
You want to create transparency based on light or dark areas in your image. Which key should you use?
A. Luma Key
B. Multiply Key
C. Chroma Key
D. Difference Key
Correct Answer: A
QUESTION 112
Which term is an invisible channel that defines transparent areas for the clip that contains the channel?
A. alpha
B. matte
C. keying
D. luminance
Correct Answer: A
QUESTION 113
An image has a particular color in it. You want all of the pixels with that color to be transparent. What is the term for this process?
A. Mask
B. Matte
C. Keying
D. Alpha Channel
Correct Answer: C
QUESTION 114
Your timeline is set to display keyframes. You want to set a new keyframe for a property in the timeline. What should you do?
A. Position the Pen tool over the keyframe graph line where you want to add the keyframe, and then click.
B. Position the Selection tool over the keyframe graph line where you want to add the keyframe, and then click.
C. Position the Pen tool over the keyframe graph line where you want to add the keyframe, and then Control-click.
D. Position the Selection tool over the keyframe graph line where you want to add the keyframe, and then Control-click.
Correct Answer: C
QUESTION 115
You want to move clip A from left to right across the screen with one full revolution. Which should you use?
A. One position keyframe and one rotation keyframe.
B. Two motion keyframes and one rotation keyframe.
C. Two position keyframes and one rotation keyframe.
D. Two position keyframes and two rotation keyframes.
Correct Answer: D QUESTION 116
You want to apply the same amount of transparency to an entire clip. What should you do?
A. choose File > Interpret Footage and automatically add an alpha channel
B. adjust the clip’s opacity in the Effect Controls window with the Opacity stopwatch turned off
C. set keyframes at the beginning of a clip, and then adjust the clip’s Opacity Handles later in the timeline
D. set keyframes at the end of a clip, and then adjust the clip’s Opacity Handles earlier in the timeline
Correct Answer: B QUESTION 117
You are composting greenscreen footage that was poorly lit. The corners of the green footage are dark. The subject is in the center of the frame, and you want to remove the dark corners to make the green screen key easier to achive. Which filter should you use to help crop the corners of the green screen footage?
A. Difference
B. Corner Pin
C. Remove Matte
D. Garbage Matte
Correct Answer: D QUESTION 118
In which situation should you deinterlace video footage?
A. You are exporting for PAL TV
B. You are exporting for the Web
C. You are exporting for NTSC TV
D. You are exporting for broadcast
Correct Answer: B QUESTION 119
Which options in the Export Movies dialog box will allow you to open and edit the original project from within another Adobe Premiere Pro project or from another application that supports the command.?
A. File Type set to Targa and Embedding Options set to Project
B. File Type set to QuickTime and Embedding Options set to None
C. File Type set to Animated GIF and Embedding Options set to None
D. File Type set to Microsoft AVI and Embedding Options set to Project
Correct Answer: D QUESTION 120
Which media format is only available when exporting a timeline using the Adobe Media Encoder?
A. QuickTime
B. RealMedia
C. Microsoft AVI
D. Microsoft DV AVI
Correct Answer: B QUESTION 121
Which set of options in the Transcode Settings dialog box of the Adobe Media Encoder will allow you to store information about the media?
A. Metadata
B. Audience
C. Multiplexer
D. Bitrate Encoding
Correct Answer: A QUESTION 122
You want to export your sequence with an alpha channel for later import into an NTSC DV project. Which compression method should you choose in the Export Movie Settings dialog box?
A. Microsoft DV
B. QuickTime Cinepak
C. QuickTime Sorenson
D. Uncompressed Microsoft .AVI with millions of colors+
Correct Answer: D QUESTION 123
Click the Exhibit button.
You are exporting the timeline using the Adobe Media Encoder as shown in the exhibit. What effect will happen if you decrease the quality from 5 to 3 have?
A. Increase the quality of the exported file
B. Reduce the interlacing of the exported file
C. Reduce the time it takes to encode the file
D. Increase the time it takes to encode the file
Correct Answer: C QUESTION 124
Click the Exhibit button.
You are exporting the timeline using the Adobe Media Encoder as shown in the exhibit. What effect will decreasing the bitrate from 8.00 to 5.00 have?
A. Reduce the file size of the exported file
B. Reduce the frame rate of the exported file
C. Reduce the frame size of the exported file
D. Reduce the number of fields in the exported file
Correct Answer: A
QUESTION 125
You are working with a sequence that will be exported to a movie for streaming Web playback. Which three encoding formats should you choose? (Choose three)
A. MPEG2
B. MPEG1
C. RealMedia
D. QuickTime
E. Microsoft DV
F. Windows Media
Correct Answer: CDF
QUESTION 126
You want to export your sequence to an NTSC DV movie for use in future NTSC DV projects. Which video options should you choose in the Export Movie Settings dialog box?
A. 720 x 480 Frame Size; No Fields (Progressive Scan); 15 fps Non Drop-Frame Timecode; Square Pixels (1.0).
B. 320 x 240 Frame Size; No Fields (Progressive Scan); 15 fps Non Drop-Frame Timecode; Square Pixels (1.0).
C. 720 x 480 Frame Size; Lower Fields First; 29.97 fps Drop Frame Timecode; D1/DV NTSC (0.9) Pixel Aspect Ratio.
D. 720 x 486 Frame Size; Lower Fields First; 29.97 fps Drop Frame Timecode; D1/DV NTSC (0.9) Pixel Aspect Ratio.
Correct Answer: C
Flydumps.com helps millions of candidates pass Adobe 9A0-040 exams and get the certifications.We have tens of thousands of successful stories.Our dumps are reliable，affordable,updated and of really best quality to overcome the difficulties of any IT certifications.Flydumpsrs.com exam dumps are latest updated in highly outclass manner on regular basis and material is released periodically.Latest Adobe 9A0-040 are available in testing centers with whom we are maintaining our relationship to get latest material.
Pass4itsure 1z1-060 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/1z0-060.html
Welcome to download the newest Examwind 350-029 VCE dumps: http://www.examwind.com/350-029.html
Flydumps Adobe 9A0-040 exam material details are researched and created by the Most Professional Certified Authors who are regularly using current exams experience to create precise and logical dumps.You can get questions and answers from many other websites or books, but logic is the main key of success, and Flydumps will give you this key of success.
QUESTION 105
You are exporting the timeline using the Adobe Media Encoder as shown in the exhibit. What effect will happen if you decrease the quality from 5 to 3 have?
A. Reduce the time it takes to encode the file
B. Increase the quality of the exported file
C. Increase the time it takes to encode the file
D. Reduce the interlacing of the exported file
Correct Answer: A
QUESTION 106
You are working in a project that is 720 by 480 pixels. You import a still image that is 1024 pixels by 768 pixels. What happens to the still image in your project?
A. It imports at 1024 pixels by 786 pixels using the still image’s pixel aspect ratio.
B. It automatically resizes to 720 pixels by 480 pixels with the project’s pixel aspect ratio.
C. It imports at 1024 pixels by 786 pixels using the project’s pixel aspect ratio.
D. It automatically resizes to 720 pixels by 480 pixels with the still image’s pixel aspect ratio
Correct Answer: A
QUESTION 107
You are composting greenscreen footage that was poorly lit. The corners of the green footage are dark. The subject is in the center of the frame, and you want to remove the dark corners to make the green screen key easier to achive. Which filter should you use to help crop the corners of the green screen footage?
A. Corner Pin
B. Difference
C. Garbage Matte
D. Remove Matte
Correct Answer: C
QUESTION 108
You want to slow down the speed of a credit roll you have created as a rolling title in the Adobe Title Designer. What should you do?
A. decrease the length of the title in the timeline
B. decrease the Speed value in the Object Style area of the Title Designer
C. increase the length of the title clip in the timeline
D. increase the Y value of the title in the Transform area of the Title Designer
Correct Answer: C
QUESTION 109
Which three transition settings can be made directly in the Effects Control window? (Choose three)
A. Change the in/out points of the A or B clip
B. Change the transition position
C. Change the duration of the transition
D. Change the transition type
E. Change the default transition
Correct Answer: ABC
QUESTION 110
You want to insert Clip D (not shown) from the Project window into Video Track 2 at edit point 1.
Which three steps should you choose? (Choose three.)
A. Drag Clip D from the Project Window to Edit Point 1 while holding the Control key.
B. Select Clip D in the Project Window and choose nsert Clip at Zero Point?from the Project Window Options menu.
C. Drag Clip D to the Project window to Edit Point 1 while holding the Alt key
D. Right-click Clip D in the Project Window and choose Insert.
E. Place Clip D in the Source Window and click the Insert button.
Correct Answer: ADE
QUESTION 111
A timebase setting of 24 has been set in the General submenu of the Project settings dialog box. Which type of footage is typically edited using that setting?
A. motion picture film
B. NTSC format video
C. SECAM format video
D. PAL format video
Correct Answer: A QUESTION 112
The capture format options are NOT appearing in the Capture submenu of the Project Settings dialog box. Which setting has been selected from the Capture Format drop down menu ?
A. QuickTime
B. DV/IEEE 1394 Capture
C. MPEG-2
D. Video for Windows
Correct Answer: B QUESTION 113
You want a title to fade in over a clip. What should you do?
A. select the clip in the timeline, then set opacity keyframes in the Effects window
B. select the clip in the timeline, then set opacity keyframes in the Effects Control window
C. select the title in the timeline, then set opacity keyframes in the Effects window
D. select the title in the timeline, then set opacity keyframes in the Effects Control window
Correct Answer: D QUESTION 114
Which audio processing step occurs first when you import a project?
A. Premiere Pro applies gain adjustments applied to clips by using the command Clip > Audio Options > Audio Gain.
B. Premiere Pro conforms its audio to the audio settings specified in the New Project dialog box.
C. Premiere Pro applies effects to clips.
D. Premiere Pro processes track settings such as prefade effects, prefade sends, mute, etc.
Correct Answer: B QUESTION 115
You want to adjust the edit point between two clips in your timeline. You do NOT want to adjust the total length of the sequence. Which editing tool or button should you use?
A. Ripple Edit tool
B. Insert Edit button
C. Extract button
D. Rolling Edit tool
Correct Answer: D QUESTION 116
What happens when you attempt to drag an audio clip (including audio linked to video) to an audio track of a different channel type?
A. A dialog box box appears, prompting you to resolve the problem by choosing another target track, or
creating a compatible target track.
B. Premiere Pro automatically generates or removes audio channels in the clip to match the audio track’s channel type.
C. The clip is added to the track; however, Premiere Pro ignores or distributes audio channels in the clip according to the audio track’s channel type.
D. The audio clip (or audio component of a linked clip) automatically shifts to the next compatible audio track; if no such track exists, then an audio track of the appropriate channel type is created automatically.
Correct Answer: D
QUESTION 117
You want to apply the same amount of transparency to an entire clip. What should you do?
A. adjust the clip’s opacity in the Effect Controls window with the Opacity stopwatch turned off
B. set keyframes at the beginning of a clip, and then adjust the clip’s Opacity Handles later in the timeline
C. choose File > Interpret Footage and automatically add an alpha channel
D. set keyframes at the end of a clip, and then adjust the clip’s Opacity Handles earlier in the timeline
Correct Answer: A
QUESTION 118
For which task should you choose Project > Automate to Sequence?
A. place parts of clips in a sequence without setting in and out points
B. quickly assemble a rough cut of clips into a sequence
C. automatically place different transitions between clips in a sequence
D. export clips from a bin to a DV camera
Correct Answer: B
QUESTION 119
Which menu allows you to set the default transition?
A. The right click menu on the transition
B. The Effects Control window menu
C. The Preferences menu
D. The Effects window menu
Correct Answer: D
QUESTION 120
In which three situations should you choose the Automate to Sequence command in the Project window? (Choose three.)
A. To automatically place the selected clips into the timeline using the default transition between clips.
B. To automatically place the selected clips into the gaps between clips already on the timeline.
C. To automatically place transitions between clips that are already on the timeline
D. To quickly assemble a rough cut in the timeline based on the sort order of the project bin.
E. To place clips on the timeline with your default effects and transitions applied
F. To automatically place the selected clips into the timeline at unnumbered markers.
Correct Answer: ADF
QUESTION 121
You have been give a Premiere Pro project file and source tapes. When you open the project, you discover that the entry for Media Type for all clips is listed as Offline. What should you do?
A. Select the clips in the Project window, and choose Project > Link Media.
B. Select the clips in the Project window and choose File > Batch Capture.
C. Choose File > Capture and in the Capture window, click the Tape button.
D. Select the clips in the Project window, drag them to the Capture window, and click the Record button.
Correct Answer: B
QUESTION 122
You are dragging the shuttle slider in the Monitor window to the left. What happens as you move the slider further to the left?
A. The clip plays backwards going slower as you drag further to the left.
B. The clip plays forward going slower as you drag further to the left.
C. The clip plays backwards going faster as you drag further to the left.
D. The clip plays forward going faster as you drag further to the left.
Correct Answer: C
QUESTION 123
An image has a particular color in it. You want all of the pixels with that color to be transparent. What is the term for this process?
A. Alpha Channel
B. Keying
C. Matte
D. Mask
Correct Answer: B
Flydumps Adobe 9A0-040 exam questions which contain almost 100% correct answers are tested and approved by senior lecturers and experts.The Flydumps Adobe 9A0-040 VCE and PDF give you the knowledge and the know how to affectively prepare for the Flydumps that you will be tested on for Adobe 9A0-040 exam.
Examwind 350-029 dumps with PDF + Premium VCE + VCE Simulator: http://www.examwind.com/350-029.html
Welcome to download the newest Flydumps C4040-108 VCE dumps: http://www.flydumps.com/C4040-108.html
Important Info: These new valid Apple 9L0-510 exam questions were updated in recent days by Apple 9L0-510,please visit our website to get the full version of new Apple 9L0-510 exam dumps with free version of new VCE Player, you can pass the exam easily by training it!
QUESTION 26
Review the screenshot of the Permissions pane in Server Admin, and then answer the question below.
Pat is a member of both the Employees group and the HR Training group. You have assigned permissions to a folder as illustrated. What access does Pat have to the folder?
A. Pat has read-only access to the folder.
B. Pat has write-only access to the folder.
C. Pat does not have any access to the folder.
D. Pat has both read and write access to the folder.
Correct Answer: A QUESTION 27
Where do you configure service access control lists (SACLs) for Mac OS X Server v10.6?
A. In Workgroup Manager’s Sharing Access pane
B. In Server Admin, in the Access pane for the currently selected server
C. In Server Admin, in the Access pane for the currently selected service
D. In Workgroup Manager, in the Access pane for a user or group record
Correct Answer: B QUESTION 28
Review the screenshot of the Permissions pane in Server Admin, and then answer the question below.
Pat is a member of both the Employees and the HR Training group. You have assigned permissions to a folder as illustrated. What access does Pat have to the folder?
A. Pat has read-only access to the folder.
B. Pat has write-only access to the folder.
C. Pat does not have any access to the folder.
D. Pat has both read and write access to the folder.
Correct Answer: D
QUESTION 29
What is the maximum number of replicas of one Open Directory master that can be used in a Mac OS X Server v10.6 Open Directory infrastructure?
A. 31
B. 64
C. 256
D. 1024
E. 1056
Correct Answer: E
QUESTION 30
You are the administrator of a Mac OS X Server v10.6 computer. In Server Admin, you click the Archive button for the Open Directory service. Which of these databases will NOT be archived?
A. Kerberos
B. LDAP Directory
C. Active Directory
D. Password Server
E. Local directory domain
Correct Answer: C
QUESTION 31
A Mac OS X Server computer is configured to provide directory data to computers on a network. You are configuring another Mac OS X Server computer to be a secondary source for the directory data. Which role should you select for it in the Open Directory service in Server Admin’s Open Directory Assistant?
A. Connect to another directory
B. Set up a standalone directory
C. Set up an Open Directory master
D. Set up an Open Directory replica
Correct Answer: D
QUESTION 32
Review the screenshot, and then answer the question below.
You open Workgroup Manager and connect to a Mac OS X Server v10.6 computer that has been configured as an Open Directory master and is bound to another LDAP server. When you click on the Directory Domain pop-up menu, it displays the options shown in the screenshot above. Which option should you choose if you want to create network user records that will be used to log into computers bound to the Open Directory master?
A. Local
B. Search Policy
C. /LDAPv3/127.0.0.1
D. /LDAPv3/mainserver.pretendco.com
Correct Answer: C QUESTION 33
What token does a client present when authenticating to a kerberized service?
A. The user’s password
B. A client-generated service ticket
C. A service ticket obtained from the Key Distribution Center (KDC)
D. A ticket-granting ticket (TGT) obtained from the Key Distribution Center (KDC)
Correct Answer: C QUESTION 34
Why might a Mac OS X computer be unable to use Kerberos to access a Mac OS X Server v10.6 computer that has Kerberos enabled for file service authorization?
A. The client and server computer’s time settings are out of sync.
B. The client computer is not configured to use a static IP address.
C. The client computer is not configured to use the server as a DNS server.
D. The IP address of the client computer does not have a PTR record in the DNS server.
Correct Answer: A
QUESTION 35
Which password policy can NOT be set for user accounts in Mac OS X Server v10.6?
A. Password must contain at least one letter.
B. Password must be reset at a specified time interval.
C. Password must differ from the last three passwords used.
D. Password must contain both uppercase and lowercase letters.
E. Password must differ from all passwords used in the past year.
F. Password must contain a character that is not a letter or a number.
Correct Answer: E
QUESTION 36
Which utility can you use to display the status of Kerberos TGTs on a Mac OS X v10.6 computer?
A. Ticket Viewer
B. Server Admin
C. KerberosAgent
D. Kerberos Utility
E. Directory Utility
Correct Answer: A
QUESTION 37
You are using Workgroup Manager to configure a user account in Mac OS X Server v10.6. You want the user to authenticate via Kerberos. Which password type should you select for the user account?
A. crypt
B. shadow
C. Open Directory
D. Kerberos Distribution
Correct Answer: C
QUESTION 38
Which of these is a zone that is configurable from Server Admin?
A. Cache
B. Master
C. Pointer
D. Forward
Correct Answer: B
QUESTION 39
What kind of DNS record is created when you add an alias in Server Admin?
A. A
B. MX
C. PTR
D. CNAME
Correct Answer: D QUESTION 40
Review the image, and then answer the question below.
The Mac OS X Server computer hosts a shared directory domain to which three Mac OS X computers, A,
B, and C, are bound. Which two statements are true of this network?
Choose two – partial credit is possible.
A. Users defined in the Shared domain of the Mac OS X Server computer can log in to client computer A.
B. Users defined only in the Local domain of client computer C can log in to the Mac OS X Server computer.
C. Users defined only in the Local domain of the Mac OS X Server computer cannot log in to client computers.
D. Directory Access was used on the Mac OS X Server computer to bind client computer B to its parent domain.
E. Directory Utility was used on the Mac OS X Server computer to bind the server to the local domain on computer A.
Correct Answer: AC
QUESTION 41
DNS service ________.
A. maps host names to Ethernet IDs, and vice versa
B. maps host names to IP addresses, and vice versa
C. identifies the primary router for a given domain name
D. tells users whether other clients are connected to the network
Correct Answer: B
QUESTION 42
In Server Admin for Mac OS X Server, what type of record should you add to the zone on your DNS server to associate a printers host name to its IP address?
A. Alias
B. Print
C. Service
D. Machine
E. Exchange
Correct Answer: D
QUESTION 43
In Mac OS X Server, you configure password policies in ________ and __________. Choose two.
A. Server Admin, as part of the Server Access settings
B. Workgroup Manager, in the Basic user account pane
C. Server Admin, as part of the Open Directory settings
D. Workgroup Manager, in the Advanced user account pane
E. Workgroup Manager, as part of the Accounts preferences
Correct Answer: CD
QUESTION 44
You have successfully installed Mac OS X Server, and are now using Server Assistant to perform the initial configuration of the server in Advanced mode. What two directory configurations are available to you? Choose two.
A. NetInfo Master
B. Standalone Server
C. Open Directory Replica
D. Open Directory Master
E. Active Directory Master
F. Connected to a Directory System
Correct Answer: DF
QUESTION 45
You are configuring a Mac OS X Server computer as a file server, but your user accounts are stored on an Active Directory server. Which Open Directory role should you choose for the Mac OS X Server computer?
A. Standalone
B. Open Directory Master
C. Open Directory Replica
D. Connected to a directory server
Correct Answer: D
Flydumps.com provide the best training material for Apple 9L0-510 certification exams. When you use our products Flydumps ensure that you emerge successful in your certification exam. We provide with the latest Apple 9L0-510 exam dumps, you can easily pass your certification exam with our exam dumps.
Flydumps C4040-108 dumps with PDF + Premium VCE + VCE Simulator: http://www.flydumps.com/C4040-108.html