Anyone who has done Microsoft 70-696 dumps? “Managing Enterprise Devices and Apps” is the 70-696 exam dumps which covers all the knowledge points of the real Microsoft exam. Latest best Microsoft 70-696 dumps MCSE exam Enterprise Devices and Apps, real Microsoft 70-696 practice exam with MCSE video series guaranteed success. Pass4itsure 70-696 dumps exam questions answers are updated (86 Q&As) are verified by experts. Microsoft 70-696 exam questions and answers candidates all know the Microsoft https://www.pass4itsure.com/70-696.html dumps questions and answers is not easy to pass.

Exam Code: 70-696 
Exam Name: Managing Enterprise Devices and Apps
Updated: Sep 04, 2017
Q&As: 86

[Free New Microsoft 70-696 Dumps Version From Google Drive]:https://drive.google.com/open?id=0BwxjZr-ZDwwWWkMxQnU0WEtjbXM

[Free New Microsoft 70-741 Dumps Version From Google Drive]:https://drive.google.com/open?id=0BwxjZr-ZDwwWWU9QM0NyNGN1cFU

But it is also the only way to success, so they have to choose Pass4itsure 70-696 dumps.

Free Pass4itsure Microsoft 70-696 Dumps Exam Questions and Answers:

QUESTION 6
Exhibit:
Given this display, how would you find information similar to the SHOW SWITCH command?
A. Click on STATISTICS, then SHOW, then SWITCH.
B. Click on STATISTICS, then SWITCH, then SHOW.
C. Click on STATISTICS, then SHOW.
D. Click on STATISTICS, then SWITCH.
70-696 exam Correct Answer: D
QUESTION 7
Which ExtremeWare feature permits ESRP to increase the number of protected VLANs by placing them
under the control of a master VLAN?
A. ESRP groups
B. ESRP domains
C. ESRP host attach
D. None of these.
Correct Answer: B
QUESTION 8
STPDs s0, s1, and s2 have been created. How would you activate only s1 while leaving the other STPDs
inactive?
A. enable stpd s1
B. enable s1 stpd
C. None of these
70-696 dumps Correct Answer: A
QUESTION 9
SNMP access to ExtremeWare can be limited by the following methods:
A. Use an access list
B. Use an access profile
C. Use the disable snmp access command
D. None of these
Correct Answer: ABC
QUESTION 10
How would you change the password for John Doe’s management account?
A. Enter config jdoe and then enter the new password twice.
B. Enter config jdoe user account and then enter the new password twice.
C. Enter config user account jdoe and then enter the new password twice.
D. Enter config account jdoe and then enter the new password twice.
70-696 pdf Correct Answer: D
QUESTION 11
What is the minimum ExtremeWare software version that supports the Summit48i?
A. ExtremeWare 4.x
B. ExtremeWare 5.x
C. ExtremeWare 6.x
D. None of the above
Correct Answer: C
QUESTION 12
When using Spanning Tree Protocol, ExtremeWare permits VLANs in different STPDs to share the same
port when tagged.
A. True
B. False
70-696 vce Correct Answer: B
QUESTION 13
Which of the following routes will be used to forward a frame to 192.168.1.174?
A. 192.168.1.0/29
B. 192.168.1.128/30
C. 192.168.1.128/25
D. None of these.
Correct Answer: C
QUESTION 14
In RIP, poison reverse means that:
A. A route is not advertised to the interface from which it was learned.
B. A route is advertised as unreachable to the interface from which it was learned.
C. Traffic whose source interface does not match the routing table is blackholed.
D. None of these.
70-696 exam Correct Answer: B
QUESTION 15
RIP version 2 uses a composite metric that includes link speed and delay.
A. True
B. False
Correct Answer: B
QUESTION 16
Unlike VRRP, the Extreme Standby Router Protocol provides redundancy at both the data link and network
layers.
A. True
B. False
70-696 dumps Correct Answer: A
QUESTION 17
__________ allow(s) multiple VLANs to be controlled by a single ESRP instance.
A. ESRP domains
B. ESRP groups
C. ESRP host-attach
D. None of these.
Correct Answer: A
QUESTION 18
QoS policy is applied _____ in an Extreme switch.
A. per port
B. per queue, per port
C. per queue
D. None of these.
70-696 pdf Correct Answer: B
QUESTION 19
Without QoS, all packets are allowed equal access to an egress port.
A. True
B. False
Correct Answer: A
QUESTION 20
Which of the following is not advertised in an OSPF Link State Advertisement?
A. Costs
B. Link utilization
C. Router interfaces
D. Neighbor information
70-696 vce Correct Answer: B
QUESTION 21
A VLAN can be a member of up to 64 STPDs.
A. True
B. False
Correct Answer: B
QUESTION 22
What type of area is used to limit external routes?
A. Stub area
B. Normal area
C. Backbone area
D. None of these
70-696 exam Correct Answer: A
QUESTION 23
All OSPF routers in the same area must have the same LSDB.
A. True
B. False
Correct Answer: A
QUESTION 24
Which 70-696 dumps RIP settings are enabled by default?
A. Triggered updates
B. Poison Reverse
C. Split Horizon
D. Route redistribution
Correct Answer: ABC
QUESTION 25
What is the default STP forward delay value?
A. 2 seconds
B. 10 seconds
C. 15 seconds
D. 20 seconds
Correct Answer: C
QUESTION 26
Which command would you use to configure the switch to disregard STP for selected VLANs?
A. enable ignore-stp vlan <stpd>
B. enable ignore-bpdu vlan <vlan>
C. enable ignore-bpdu stpd <stpd>
D. enable ignore-stp vlan <vlan>
70-696 pdf Correct Answer: D
QUESTION 27
When the command disable stpd port 4:1-4:8 is entered what is the result?
A. Ports 4:1-4:8 are placed into the blocking state.
B. Ports 4:1-4:8 are placed into the listening state.
C. Ports 4.1-4.8 are placed into the learning state.
D. Ports 4:1-4:8 are placed into the forwarding state.
Correct Answer: D
QUESTION 28
How can you tell which ports are disabled?
A. Flashing amber light
B. Flashing green light
C. Flashing red light
D. None of these
70-696 vce Correct Answer: B
QUESTION 29
Your Summit5i switch is connected to a 3rd party switch. By issuing the show ports rxerrors command you
can see numerous CRC errors listed. What is the first step you should take to resolve this issue?
A. Examine the log for errors.
B. Ping between the two switches.
C. Match the speed and duplex settings for the two devices.
D. Call the Extreme Networks TAC.
Correct Answer: C
QUESTION 30
You have been assigned the task of configuring an 8-port load share group between two switches that
uses the round robin-based algorithm. Which of the following commands will provide you with the desired
result?
A. Summit #1: config sharing 1 grouping 1-8 algorithm round-robin, Summit #2: configsharing 1 grouping
1-8 algorithm round-robin
B. Summit #1: enable sharing 1 grouping 1-8 algorithm round-robin, Summit #2: enablesharing 8 grouping
1-8 algorithm round-robin
C. Summit #1: config sharing 1 grouping 1-8 algorithm round-robin, Summit #2: configsharing 8 grouping
1-8 algorithm round-robin
D. Summit #1: enable sharing 1 grouping 1-8 algorithm round-robin, Summit #2: enablesharing 1 grouping
70-696 exam Correct Answer: D
QUESTION 31
Routing is disabled in all VLANs by default.
A. True
B. False
Correct Answer: A
QUESTION 32
What 70-696 dumps information can you find using the show edp command?
A. ExtremeWare code version used by remote switch.
B. The ports that are disabled on the remote switch.
C. The master port of any load share groups.
D. The speed and duplex settings of the ports connecting the two switches.
Correct Answer: A
QUESTION 33
How could you verify that MAC address learning is disabled for ports 1-8 on a Summit7i switch?
A. Enter the show ports config detail command.
B. Enter the show ports management detail command.
C. Enter the show ports statistics detail command.
D. Enter the show ports info detail command.
Correct Answer: D
QUESTION 34
Which of the following are valid ESRP master election algorithms?
A. ports_track_priority_mac
B. ports_priority_track_mac
C. track_ports_priority_mac
D. track_priority_ports_mac
70-696 pdf Correct Answer: AC
QUESTION 35
What is the command you would use to configure a VLAN for ESRP?
A. enable esrp vlan <vlan>
B. enable esrp vlan <vlan> detail
C. config esrp vlan <vlan>
D. config esrp vlan <vlan> detail
Correct Answer: A
QUESTION 36
Which command would you use to configure ESRP ping tracking for the gateway address 10.0.0.1 with a
frequency of 2 seconds and a miss threshold of 5?
A. enable vlan <vlan> add track-ping add 10.0.0.1 frequency 2 miss 5
B. enable esrp add track-ping add 10.0.0.1 frequency 2 miss 5
C. config esrp track-ping add 10.0.0.1 frequency 2 miss 5
D. config vlan <vlan> add track-ping 10.0.0.1 frequency 2 miss 5
70-696 vce Correct Answer: D

In order to improve the value of your career, you must pass this certification exam. The 70-696 dumps exam questions and answers designed by Pass4itsure contain different targeted, and have wide coverage. There is no any other books or other information can transcend it. The question bprovided by Pass4itsure definitely https://www.pass4itsure.com/70-696.html exam questions and answers that help you pass the exam.