I’m guessing you’re looking for the right NS0-194 study materials to prepare for the NetApp Certified Support Engineer exam, and our latest version of the NS0-194 exam dumps are there to help you learn.
New NS0-194 exam dumps for studying. To get it, you need to go to this page to download the NS0-194 exam dumps: https://www.pass4itsure.com/ns0-194.html There are 60 mock exam questions and answers to help you better study the actual NetApp NS0-194 exam.
Do I need to know about the NetApp Certified Support Engineer exam to pass?
Yes, you have to know about the NS0-194 exam. Here are the highlights.
Exam Code: NS0-194 NCSE Exam Title: NetApp Certified Support Engineer Exam Price: $150 Duration: 90 minutes Passing score: 63% Free questions: see below Number of questions: 60 Official resources:
Introduction to NetApp Storage System Basic Components (WBT)
Introduction to Clustered Data ONTAP Architecture (WBT)
Introduction to Aggregates and FlexVols in Clustered Data ONTAP (WBT)
Introduction to Networking in Clustered Data ONTAP (WBT)
Introduction to High-Availability in Clustered Data ONTAP (WBT)
Introduction to Data Protection in Clustered Data ONTAP (WBT)
Valid study material: Pass4itSure NS0-194 exam dumps
Which are the best study materials for NS0-194 exam preparation?
You can choose to trust Pass4itSure. Pass4itSure NS0-194 exam dumps Learning materials are valid, current, and accurate …
You received the “CLUSTER ERROR: DISK/SHELF COUNT MISMATCH” AutoSupport message from an ONTAP cluster. When analyzing this message, which two should be inspected? (Choose two.)
A. drive paths B. IOM firmware C. drive firmware D. SAS cabling
Correct Answer: AC
QUESTION # 2
A volume was accidentally deleted two hours ago by another administrator. No backups exist. In this scenario, what do you do to restore the data?
A. Use the ONTAP System Manager to recover the volume. B. Use a volume snapshot to return the data to the active file system. C. Use the volume recovery queue to restore the volume. D. Use an aggregate snapshot to revert the aggregate to an earlier state.
You have determined that an SFP+ has failed on one of your storage controllers. In this scenario, what do you use to determine which SFP+ should be replaced by NetApp Support?
A. NetApp Active IQ B. Interoperability Matrix Tool C. NetApp Documentation Center D. Hardware Universe
Correct Answer: D
QUESTION # 4
While troubleshooting client access issues to a CIFS share, you notice that the issue only occurs when the data LIF that the clients are accessing is on a specific node in the cluster. In this scenario, which configuration should you review to determine why this issue is happening?
A. cluster health B. Kerberos C. share path D. export policies
You observe cyclic redundancy check (CRC) errors on a network port from a node in the cluster. Which two components would you consider reseating or replacing before you perform actions on the physical port where the errors are reported from the node? (Choose two.)
A. SFP B. cluster interconnect switch C. up-stream switch D. cable
Correct Answer: CD
QUESTION # 6
Your customer\’s MetroCluster has generated a “DISK REDUNDANCY FAILED” message. Netapp-EmA: Tue Jan 14 04:12:12 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’ failed.
Tue Jan 14 04:12:13 CET [netapp-EmA:rv.connection.torndown:info]: HA interconnect: cfo_rv1 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’1 failed.
Tue Jan 14 04:12:15 CET [netapp-EmA:rv.connection.torndown:info]: HA interconnect: cfo_rv2 is torn down on NIC 1.
Tue Jan 14 04:12:18 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’2 failed.
Tue Jan 14 04:12:19 CET [netapp-EmA:bridge.removed:info]: FC-to_SAS bridge siteB_2:13.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111161] was removed Tue Jan 14 04:12:19 CET [netappEmA:bridge.removed:info]: FCto_SAS bridge siteB_2:5.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111160] was removed
Netapp-EmB: Tue Jan 14 04:12:12 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’ failed.
Tue Jan 14 04:12:12 CET [netapp-EmB:rv.connection.torndown:info]: HA interconnect: cfo_rv2 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmB:rv.connection.torndown:info]: HA interconnect: cfo_rv1 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’1 failed.
Tue Jan 14 04:12:18 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’2 failed.
Tue Jan 14 04:12:19 CET [netapp-EmB:bridge.removed:info]: FC-to_SAS bridge siteA_2:13.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111167] was removed Tue Jan 14 04:12:19 CET [netappEmB:bridge.removed:info]: FCto_SAS bridge siteA_2:5.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111164] was removed Referring to the messages shown in the exhibit for each node, which component is causing the problem?
A. the ATTO bridge on siteB_2 B. the SAN switch siteA_2 C. the SAN switch siteB_2 D. the ISL between site and site B\
Correct Answer: D
QUESTION # 7
A customer ordered a FAS2720 cluster with 8 TB SATA drives. The customer wants to use the Advanced Drive Partitioning (ADP) feature to avoid consuming the high-capacity drives for the root aggregate. Before you use the cluster setup, you issue the aggr status command and notice that ADP is not being used.
In this scenario, what would you use to implement ADP?
A. loader prompt B. special boot menu C. nodeshell D. SP prompt
Correct Answer: A
QUESTION # 8
A customer will need to perform an upgrade from 9.0 to 9.4. Which feature of ONTAP enables non-disruptive hardware maintenance for this upgrade?
A. aggregate relocation B. FlexVol C. FlexGroup D. RAID-TEC
Test user “LAB\tester” can perform an operation in the CIFS share “HR” from the SVM “svm1”. However, the rest of the users from the HR department cannot perform the same operation. You want to determine why only “LAB\tester” can perform the operation.
In this scenario, which security trace filter accomplishes this task?
A. vserver security trace filter create -vserver svm1 -index 1 -protocol nfs -unix-name tester -trace-allow no B. vserver security trace filter create -vserver svm1 -index 1 -protocol cifs -windows- name LAB\tester -trace-allow no C. vserver security trace filter create -vserver svm1 -index 1 -protocol cifs -windows- name LAB\tester -trace-allow yes D. vserver security trace filter create -vserver svm1 -index 1 -protocol nfs -unix-name tester -trace-allow yes
Correct Answer: C
QUESTION # 11
In ONTAP 9.6, activity on the command line is found in which log?
A. audit.log B. messages.log C. command-history.log D. mgwd.log
A customer receives the message shown below in their EMS logs. Tue Jun 27 18:34:18 CEST [netapp-ct1: cp_worker: wafl.cp.too long: error]: Aggregate AG1_NTAP_PROD experienced a long CP. Tue Jun 27 18:37:10 CEST Which two data sources do you use to explain this message? (Choose two.)
A. ONTAP System Manager B. Performance Archive C. Active IQ Unified Manager D. mgwd.log
What are two reasons to use VLANs in a NetApp storage solution? (Choose two.)
A. to isolate UDP traffic from TCP traffic B. to isolate management traffic from other IP traffic C. to isolate iSCSI traffic from NAS traffic D. to isolate FC traffic from other IP traffic
Correct Answer: AC
Want more, need to get the full NS0-194 exam dumps, here.
Effective preparation for the Fortinet NSE 4 – FortiOS 7.0 exam will do more with less. Test takers choose a valid Fortinet NSE 4 – FortiOS 7.0 preparation material to prepare for the NSE4_FGT-7.0 exam to advance their careers. We have updated the valid NSE4_FGT-7.0 dumps to help you prepare for the exam.
Passing the NSE4_FGT-7.0 exam requires selecting appropriate study materials to prepare for the exam.
NSE4_FGT-7.0 Fortinet exam do you have to pass?
The Fortinet NSE 4—FortiOS 7.0 exam is part of the NSE 4 Cybersecurity Professional Program and recognizes successful candidates’ knowledge and expertise in FortiGate. If you want to be certified, you must pass successfully.
What should I pay attention to for the Fortinet NSE 4 – FortiOS 7.0 exam?
Exam name: Fortinet NSE 4—FortiOS 7.0 Exam series: NSE4_FGT-7.0 Time allowed: 105 minutes Exam questions: 60 multiple-choice questions Language: English and Japanese Product version: FortiOS 7.0 Official resources: NSE 4 FortiGate Security 7.0 NSE 4 FortiGate Infrastructure 7.0 FortiOS 7.0—Administration Guide FortiOS 7.0—New Features Guide Prepare resources efficiently: Pass4itSure NSE4_FGT-7.0 Dumps
The above is some basic knowledge about Fortinet NSE 4 – FortiOS 7.0 exam, you must know, then you need to find good preparation materials to practice.
Where can I get NSE4_FGT-7.0 dumps to prepare for the exam?
Pass4itSure NSE4_FGT-7.0 dumps are the right choice for you. The current NSE4_FGT-7.0 dumps in Pass4itSure are real, which can be the key to easily passing the Fortinet NSE 4 – FortiOS 7.0 exam.
Free NSE4_FGT-7.0 exam questions answers
QUESTION # 1
FortiGuard categories can be overridden and defined in different categories. To create a web rating override for example.com home page, the override must be configured using a specific syntax. Which two syntaxes are correct to configure web rating for the home page? (Choose two.)
A. www.example.com:443 B. www.example.com C. example.com D. www.example.com/index.html
Correct Answer: BD
QUESTION # 2
Which two statements about IPsec authentication on FortiGate are correct? (Choose two.)
A. For a stronger authentication, you can also enable extended authentication (XAuth) to request the remote peer to provide a username and password B. FortiGate supports pre-shared key and signature as authentication methods. C. Enabling XAuth results in faster authentication because fewer packets are exchanged. D. A certificate is not required on the remote peer when you set the signature as the authentication method.
The Root and To_Internet VDOMs are configured in NAT mode. The DMZ and Local VDOMs are configured in transparent mode. The Root VDOM is the management VDOM. The To_Internet VDOM allows LAN users to access the internet.
The To_lnternet VDOM is the only VDOM with internet access and is directly connected to the ISP modem. Which two statements are true? (Choose two.)
A. Inter-VDOM links are required to allow traffic between the Local and Root VDOMs. B. A static route is required on the To_Internet VDOM to allow LAN users to access the internet. C. Inter-VDOM links are required to allow traffic between the Local and DMZ VDOMs. D. Inter-VDOM links are not required between the Root and To_Internet VDOMs because the Root VDOM is used only as a management VDOM.
Correct Answer: AD
QUESTION # 4
Which statements about the firmware upgrade process on an active-active HA cluster are true? (Choose two.)
A. The firmware image must be manually uploaded to each FortiGate. B. Only secondary FortiGate devices are rebooted. C. Uninterruptable upgrade is enabled by default. D. Traffic load balancing is temporally disabled while upgrading the firmware.
Correct Answer: CD
QUESTION # 5
A FortiGate is operating in NAT mode and configured with two virtual LAN (VLAN) sub-interfaces added to the physical interface. Which statements about the VLAN sub-interfaces can have the same VLAN ID, only if they have IP addresses in different subnets.
A. The two VLAN sub-interfaces can have the same VLAN ID, only if they have IP addresses in different subnets. B. The two VLAN sub-interfaces must have different VLAN IDs. C. The two VLAN sub-interfaces can have the same VLAN ID, only if they belong to different VDOMs. D. The two VLAN sub-interfaces can have the same VLAN ID, only if they have IP addresses in the same subnet.
Correct Answer: B
FortiGate_Infrastructure_6.0_Study_Guide_v2-Online.pdf ?gt; page 147 “Multiple VLANs can coexist in the same physical interface, provide they have different VLAN ID”
QUESTION # 6
By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers. Which two CLI commands will cause FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering? (Choose two.)
A. set fortiguard anycast disable B. set protocol UDP C. set web filter-force-off to disable D. set web filter-cache to disable
Correct Answer: AC
QUESTION # 7
Refer to the exhibit, which contains a radius server configuration.
An administrator added a configuration for a new RADIUS server. While configuring, the administrator selected the Include in every user group option. What will be the impact of using Include in every user group option in a RADIUS configuration?
A. This option places the RADIUS server and all users who can authenticate against that server, into every FortiGate user group. B. This option places all FortiGate users and groups required to authenticate into the RADIUS server, which, in this case, is FortiAuthenticator. C. This option places all users into every RADIUS user group, including groups that are used for the LDAP server on FortiGate. D. This option places the RADIUS server, and all users who can authenticate against that server, into every RADIUS group.
Correct Answer: A
QUESTION # 8
Refer to the exhibit.
The exhibits show a network diagram and the explicit web proxy configuration. In the command diagnose sniffer packet, what filter can you use to capture the traffic between the client and the explicit web proxy?
A. host 192.168.0.2 and port 8080\\' B.host 10.0.0.50 and port 80\’ C. host 192.168.0.1 and port 80\\' D.host 10.0.0.50 and port 8080\’
Correct Answer: A
QUESTION # 9
Which three criteria can a FortiGate use to look for a matching firewall policy to process traffic? (Choose three.)
A. Source is defined as Internet Services in the firewall policy. B. Destination is defined as Internet Services in the firewall policy. C. Highest to lowest priority defined in the firewall policy. D. Services defined in the firewall policy. E. Lowest to the highest policy ID number.
The exhibit contains a network diagram, firewall policies, and a firewall address object configuration. An administrator created a Deny policy with default settings to deny Webserver access for Remote- user2. Remote-user2 is still able to access Webserver.
Which two changes can the administrator make to deny Webserver access for Remote-User2? (Choose two.)
A. Disable match-VIP in the Deny policy. B. Set the Destination address as Deny_IP in the Allow-access policy. C. Enable match VIP in the Deny policy. D. Set the Destination address as Web_server in the Deny policy.
Correct Answer: AB
QUESTION # 11
Which two protocol options are available on the CLI but not on the GUI when configuring an SD-WAN Performance SLA? (Choose two.)
A. DNS B. ping C. UDP-echo D. TWAMP
Correct Answer: AC
QUESTION # 12
In an explicit proxy setup, where is the authentication method and database configured?
A. Proxy Policy B. Authentication Rule C. Firewall Policy D. Authentication scheme
Correct Answer: D
QUESTION # 13
What devices form the core of the security fabric?
A. Two FortiGate devices and one FortiManager device B. One FortiGate device and one FortiManager device C. Two FortiGate devices and one FortiAnalyzer device D. One FortiGate device and one FortiAnalyzer device
