Category: nse7 sdw-6.4 exam

NSE7_SDW-6.4 Dumps [Update] Most Useful Fortinet NSE 7 – SD-WAN 6.4 Online ResourceNSE7_SDW-6.4 Dumps [Update] Most Useful Fortinet NSE 7 – SD-WAN 6.4 Online Resource

It is highly recommended to select NSE7_SDW-6.4 dumps (updated), a validated and valid online learning resource.

Want to get the most useful Fortinet NSE 7 – SD-WAN 6.4 online resources and successfully earn the popular NSE 7 Network Security Architect certification NSE7_SDW-6.4 exam? Jump to the Pass4itSure NSE7_SDW-6.4 Dumps page >>https://www.pass4itsure.com/nse7_sdw-6-4.html you’ll see real learning resources NSE7_SDW-6.4 PDF and NSE7_SDW-6.4 VCE Q&A exercises, either of which you can choose and take you into the haven of NSE 7 Network Security Architect certification.

Choose valid NSE7_SDW-6.4 dumps to practice NSE7_SDW-6.4 exam questions and answers. This is the most correct learning resource. Pass4itSure ensures that you are successfully certified by NSE 7 Network Security Architect.

Free NSE7_SDW-6.4 Dumps Exam Questions and Answers Online Download: https://drive.google.com/file/d/1RxSAkjjebNrNVbtyC9ej9yKWCAI6o6RA/view?usp=sharing

What do you really need to know to pass the NSE7_SDW-6.4 exam?

Next, I’ll share some knowledge points about the Fortinet NSE 7 – SD-WAN 6.4 exam.

The Fortinet NSE 7—SD-WAN 6.4 exam is abbreviated NSE7_SDW-6.4 is part of the NSE 7 Cybersecurity Architect Program and must be successfully passed to earn the NSE 7 Network Security Architect certification

(other exams related to certification:
NSE7_OTS-6.4: Fortinet NSE 7 – OT Security 6.4,
NSE7_PBC-6.4: Fortinet NSE 7 – Public Cloud Security 6.4,
NSE7_EFW-6.2: Fortinet NSE 7 – Enterprise Firewall 6.2,
NSE7_EFW-6.0: Fortinet NSE 7 – Enterprise Firewall 6.0,
NSE7_ATP-2.5: Fortinet NSE 7 – Advanced Threat Protection 2.5,
NSE7_EFW: NSE7 Enterprise Firewall – FortiOS 5.4)

The candidate’s knowledge and expertise in Fortinet SD-WAN solutions are primarily examined.

 NSE 7 Network Security Architect

Exam basics:

  • Exam duration: 60 minutes
  • Total: 35 multiple choice questions
  • Language: English
  • Product versions: FortiOS 6.4.5, FortiManager 6.4.5, and FortiAnalyzer 6.4.5

The knowledge points you need to master are as follows:

l SD-WAN configuration
l Configure basic SD-WAN setup
l Configure SD-WAN rules
l Configure SD-WAN SLAs
l Configure SD-WAN routing
l Central management
l Centrally manage an SD-WAN infrastructure from FortiManager
l Troubleshoot central management problems
l VPN
l Implement a full or partially meshed redundant VPN infrastructure
l Troubleshoot VPN and ADVPN
l SD-WAN troubleshooting
l Troubleshoot SD-WAN

NSE7_SDW-6.4 What is the most critical thing to the success or failure of the exam?

The right choice. Useful NSE7_SDW-6.4 online resources – Pass4itSure NSE7_SDW-6.4 dumps are recommended to help you avoid detours and easily achieve NSE7_SDW-6.4 exam success.

Of course, just having resources, and not practicing diligently, is not enough, you need to practice daily.

So the question is, how to find free NSE7_SDW-6.4 dumps exam questions and answers to practice?

I will share it with you. NSE7_SDW-6.4 dumps Q&As 1-13.

QUESTION 1

Refer to the exhibit.

Which statement about the command route-tag in the SD-WAN rule is true?

A. It ensures route tags match the SD-WAN rule based on the rule order.
B. It tags each route and references the tag in the routing table.
C. It enables the SD-WAN rule to load balance and assign traffic with a route tag.
D. It uses route tags for a BGP community and assigns the SD-WAN rules with same tag.

Correct Answer: A

Reference: https://docs.fortinet.com/document/fortigate/6.2.9/cookbook/672387/using-bgp-tags-with-sdwan-rules

QUESTION 2

Which statement is correct about the SD-WAN and ADVPN?

A. Spoke support dynamic VPN as a static interface.
B. Dynamic VPN is not supported as an SD-WAN interface.
C. ADVPN interface can be a member of SD-WAN interface.
D. Hub FortiGate is limited to use ADVPN as SD-WAN member interface.

Correct Answer: C

QUESTION 3

Which two statements about the debug output are correct? (Choose two.)

A. The debug output shows per-IP shaper values and real-time readings.
B. This traffic shaper drops traffic that exceeds the set limits.
C. Traffic being controlled by the traffic shaper is under 1 Kbps.
D. FortiGate provides statistics and reading based on historical traffic logs.

Correct Answer: AB

QUESTION 4

Refer to exhibits.

Exhibit A, which shows the SD-WAN performance SLA and exhibit B shows the health of the participating SD-WAN members. Based on the exhibits, which statement is correct?

A. The dead member interface stays unavailable until an administrator manually brings the interface back.
B. Port2 needs to wait 500 milliseconds to change the status from alive to dead.
C. The SLA state of port2 has exceeded three consecutive unanswered requests from the SLA server.
D. Check interval is the time to wait before a packet sent by a member interface considered as lost.

Correct Answer: C

QUESTION 5

Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two.)

A. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links.
B. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance.
C. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub.
D. It provides direct connectivity between all sites by creating on-demand tunnels between spokes.

Correct Answer: CD

QUESTION 6

Which statement reflects how BGP tags work with SD-WAN rules?

A. VPN topologies are formed using only BGP dynamic routing with SD-WAN.
B. Route tags are used for a BGP community and the SD-WAN rules are assigned the same tag.
C. BGP tags require that the adding of static routes be enabled on all ADVPN interfaces.
D. BGP tags match the SD-WAN rule based on the order that these rules were installed.

Correct Answer: A

QUESTION 7

Refer to the exhibit.

Which two statements about the status of the VPN tunnel are true? (Choose two.)

A. There are separate virtual interfaces for each dial-up client.
B. VPN static routes are prevented from populating the FortiGate routing table.
C. FortiGate created a single IPsec virtual interface that is shared by all clients.
D. 100.64.3.1 is one of the remote IP address that comes through index interface 1.

Correct Answer: CD

QUESTION 8

In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two.)

A. Traffic has matched none of the FortiGate policy routes.
B. Matched traffic failed RPF and was caught by the rule.
C. The FIB lookup resolved interface was the SD-WAN interface.
D. An absolute SD-WAN rule was defined and matched traffic.

Correct Answer: AC

QUESTION 9

Refer to the exhibit.

Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?

A. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
B. Changes have been made on firewall policy ID 1 on FortiGate.
C. Firewall policy ID 1 has source NAT disabled.
D. FortiGate has terminated the session after a change on policy ID 1.

Correct Answer: B

QUESTION 10

Refer to the exhibit.

Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2. The administrator configured ADVPN on the dual regions topology. Which two statements are correct if a user in Toronto sends traffic to London? (Choose two.)

A. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
B. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
C. London generates an IKE information message that contains the Toronto public IP address.
D. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.

Correct Answer: AD

Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/320160/example-advpnconfiguration

QUESTION 11

What are two benefits of using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two.)

A. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices.
B. It improves SD-WAN performance on the managed FortiGate devices.
C. It sends probe signals as health checks to the beacon servers on behalf of FortiGate.
D. It acts as a policy compliance entity to review all managed FortiGate devices.
E. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server.

Correct Answer: AD

QUESTION 12

Which statement about using BGP routes in SD-WAN is true?

A. Adding static routes must be enabled on all ADVPN interfaces.
B. VPN topologies must be form using only BGP dynamic routing with SD-WAN.
C. Learned routes can be used as dynamic destinations in SD-WAN rules.
D. Dynamic routing protocols can be used only with non-encrypted traffic.

Correct Answer: C

Reference:
https://www.fortinetguru.com/2019/09/using-bgp-tags-with-sd-wan-rules-fortios-6-2/#:~:text=SD%2DWAN%20rules%20can%20use,to%20the%20customer\\’s%20data%20center.

QUESTION 13

Refer to exhibits.

Exhibit A shows the source NAT global setting and exhibit B shows the routing table on FortiGate.
Based on the exhibits, which two statements about increasing the port2 interface priority to 20 are true? (Choose two.)

A. All the existing sessions that do not use SNAT will be flushed and routed through port1.
B. All the existing sessions will continue to use port2, and new sessions will use port1.
C. All the existing sessions using SNAT will be flushed and routed through port1.
D. All the existing sessions will be blocked from using port1 and port2.

Correct Answer: BC

To continue viewing 35 questions NSE7 SDW-6.4 exam , this website