To obtain a Huawei-certified HCIA-Routing and Switching V2.5 H12-211 exam, you must be ready for the exam. The most important thing is the H12-211 exam dumps materials! But so many resources provide strange content in actual exams or don’t prepare us in a meaningful way. Therefore, Pass4itSure is different. Pass4itSure eliminates the problem and provides meaningful test preparation.
Pass4itSure H12-211 exam dumps (Link https://www.pass4itsure.com/h12-211.html PDF + VCE) provide real-world questions about simulated test sites and worksites to help you acquire the core skills and key competencies you need for Huawei certification and future careers.
Huawei HCIA-Routing & Switching V2.5 H12-211 PDF free download
Take advantage of this once-in-a-lifetime opportunity today. This is part of the real H12-211 exam question. After that, you must also devote enough time to complete your studies before you can pass.
Share some Huawei H12-211 exam questions and answers below:
QUESTION 1 #
Which of the following forms of DUID can be configured when DHCPv6 is configured in the VRP system? (multiple choice)
A. DUID-LL B. DUID-LLT C. DUID-EN D. DUID-LLC
Correct Answer: AB
QUESTION 2 #
The STP switch sends BPDUs. The correct statement about BPDU is (). (multiple choice)
A. BPDU is a frame using the IEEE802.3 standard B. BPDU is a frame using the Ethernet II standard C. The Control field value of the BPDU frame is 3 D. The destination MAC address of the BPDU frame is the broadcast address
Correct Answer: AC
QUESTION 3 #
What benefits does port aggregation yield? (Choose three)
A. Improves link bandwidth B. Implements load sharing C. Improves network reliability D. Facilitates data copy for analysis
Correct Answer: ABC
QUESTION 4 #
A layer 2 LAN switch generates CAM table entries according to the ( ) of the received frame.
A. Source MAC address B. Destination MAC address C. Source IP address D. Destination IP address
Correct Answer: A
QUESTION 5 #
The network administrator wishes to transmit data between two end stations. The network interface cards of both devices operate at 100Mbps however one supports half-duplex while the other uses full-duplex mode.
What will occur as a result?
A. The end stations cannot communicate. B. The end stations can communicate, but data may be lost during the transmission of large amounts of traffic. C. The end stations will operate normally D. The end stations can communicate, but speed is different during the transmission of large amounts of traffic
Correct Answer: B
QUESTION 6 #
InARP resolves the protocol address of the remote device on each virtual circuit, including IP addresses and IPX addresses.
A. True B. False
Correct Answer: A
QUESTION 7 #
Which of the following are routing protocols? (multiple choice)
A. IP B. OSPF C. BGP D. IPX
Correct Answer: BC
QUESTION 8 #
Which of the following port status may exist on an STP-enabled switch?
A. Forwarding B. Listening C. Discarding D. Disabled
Correct Answer: AB
QUESTION 9 #
As shown in the figure, after the network administrator finishes the Telnet configuration on the router, it finds that the host cannot establish a connection with the router through Telnet. Which options can help solve this problem? (multiple choice)
A. Check if the host\’s ARP cache table overflows B. Check if the switch is configured with the default gateway address. C. Use ping to check the IP connectivity between the host and router G0/0/0 interface D. Check if the Telnet configuration on the router is correct.
Correct Answer: CD
QUESTION 10 #
Which of the following protocols can be used on a Layer 2 network with redundant links to prevent loops?
A. UDP B. VRRP C. STP D. ARP
Correct Answer: C
QUESTION 11 #
Refer to the debug output. Following the configuration of R2, the administrator discovers that the behavior is not as expected and performs debugging. Based on the output from the debug, what is the source of the problem?
A. R2 has configured an ACL to block the route to network 1.0.0.0 B. R2 has enabled split horizon. C. R1 is using authentication, however, R2 is not. D. R2 is operating using RIPv2, while R1 is using RIPv1.
Correct Answer: D
QUESTION 12 #
Which of the following regarding Frame Relay DLCI is correct? (Choose three)
A. DLCI is locally significant B. DLCI is allocated by DTE C. The range of DLCI values that can be used is from 16-1007 D. The same DLCI can be configured on different physical interfaces
Correct Answer: ACD
QUESTION 13 #
SNMP packets are encapsulated in TCP packets.
A. True B. False
Correct Answer: B
The help of free H12-211exercise questions is also great, adding a point to your exam success. If you feel good, you can go get full at Pass4itSure.
The ultimate success in the Huawei H12-211 exam is no longer a dream.
Pass4itSure guarantees that you pass the Huawei H12-211-ENUC certification exam. You can visit here for the latest Huawei certification exam practice news.
H12-211 dumps are very important for the exam, it will help you save a lot of time and help you get a high score. You need to prepare for the Huawei H12-211 exam with great interest because it is a very popular and important certificate.
How to get H12-211 exam dumps of Huawei H12-211 practice questions? If you want to take the H12-211 exam, please use the Huawei H12-211 dumps preparation materials designed by Pass4itSure experts to start your preparations. The real Huawei H12-211 preparation materials are here ~ https://www.pass4itsure.com/h12-211.html
Huawei H12-211 exam questions and answers online practice test free
QUESTION 1
Which of the following statements regarding static and dynamic routing is incorrect?
A. The static route can be easily configured and managed on the enterprise network. B. The use of dynamic routing is more convenient for the administrator to manage the network following network convergence. C. The static route can automatically recover when a link failure is encountered. D. Dynamic routing will use more resources than static routes. Correct Answer: C
QUESTION 2
When an IPsec tunnel is established between two routers, which of the following parameters does not need to be consistent between IPsec peers?
A. The security protocol used B. Data encapsulation mode C. Proposal name D. Authentication algorithm Correct Answer: C
QUESTION 3
What is the number range of a basic ACL?
A. 2000-2999 B. 3000-3999 C. 4000-4999 D. 6000-6031 Correct Answer: A
QUESTION 4
What is the value of the Type field in RSTP configuration BPDUs?
A. 0×00 B. 0×01 C. 0×02 D. 0×03 Correct Answer: A
QUESTION 5
If the administrator wants to update the VRP of the AR2200 router, the correct method is (). (multiple choice) A. The administrator configures the AR2200 as an FTP client to transfer VRP software through FTP. B. The administrator configures the AR2200 as an FTP server to transmit VRP software through FTP. C. The administrator configures the AR2200 as a TFTP server and transmits VRP software through TFTP. D. The administrator configures the AR2200 as a TFTP client to transmit VRP software through TFTP. Correct Answer: ABD
QUESTION 6
system-view [Huawei]command privilege level 3 view user save The correct statement about the above configuration the command is ()
A. Modify the save command of a user to have a permission level of 3 B. Modify the permission level of the save command in the user view to 3 C. Modify the user view command to a permission level of 3 and save the configuration D. Modify the user\’s permission level to 3 and save the configuration Correct Answer: B
QUESTION 7
The ACL configuration shown above is completed on the router RTA, and the following description is correct (). [RTA]acl 2001 Huawei question bank battle report group: 434299778[RTA-acl-basic-2001]rule 20 permit source 20.1.1.0 0.0.0.255 [RTA-acl-basic-2001]rule 10 deny source 20.1.1.0 0.0.0.255
A. The VRP system will automatically adjust the order of the first rule in the order of configuration. B. The VRP system does not adjust the sequence number, but will first match the rule of the first configuration. 20.1.1.0 0.0.0.255 C. Configuration error, the order number of the rule must be from small to large. D. The VRP system will first match the second rule in order. deny source 20.1.1.0 0.0.0.255 Correct Answer: D
QUESTION 8
When RIPv1 is enabled on the Huawei router, the interface that is advertised to the RIP receives the RIPv1 broadcast packet, the RIPv2 broadcast packet, and the multicast packet by default.
The administrator has captured three packets in the network. Which statement regarding the captured packets is incorrect?
A. These packets represent a TCP three-way handshake process. B. 10.0.12.1 is the telnet server, while 10.0.12.2 is the telnet client. C. The three packets contain no application data. D. 10.0.12.1 uses port 50190 to build the telnet connection. Correct Answer: B
QUESTION 10
One of the reasons that segment routing (SR) is introduced is that traditional LDP has some restrictions. Which of the following statements about LDP restrictions are true?
A. LDP does not support automatic label allocation. B. LDP supports path computation only based on IGP SPF (minimum cost), not based on traffic engineering. C. LDP path computation depends on an IGP. If the IGP and LDP are not synchronized, black holes are generated, affecting services. D. LDP has 11 types of protocol packets, which greatly increases link bandwidth consumption and device CPU usage. Correct Answer: CD
QUESTION 11
For DHCP, the priority of an interface address pool is higher than that of a global address pool.
A. True B. False Correct Answer: A
QUESTION 12
The company network engineer has an AR2200 that cannot be started normally. How can the administrator want to update its VRP?
A. The administrator needs to use the console cable to connect to the router and host, and then enter the BootROM interface to complete the upgrade. B. The administrator needs to configure the AR2200 as an FTP client and use FTP to transfer the new C. The administrator needs to configure the AR2200 to obtain an IP address through DHCP and then obtain the VRP system file through TFTP. D. The administrator needs to use telnet on the local host to remotely update the VRP system files of the device. Correct Answer: B
QUESTION 13
OSPF allows for “multiple” processes. By default, OSPF selects a process whose number is ( ).
A. 0 B. 1 C. 10 D. 100 Correct Answer: B
Summarize
Through Pass4itSure Huawei H12-211 dumps, let yourself have confidence in the questions of the Huawei H12-211 exam. The key to getting a high score is to get the correct H12-211 dumps. Purchase full H12-211 dumps questions https://www.pass4itsure.com/h12-211.html (PDF + VCE). 100% help you successfully pass the exam.
