Day: July 29, 2016

Cisco 650-128 Study Guides, High Pass Rate Cisco 650-128 Dumps Are The Best MaterialsCisco 650-128 Study Guides, High Pass Rate Cisco 650-128 Dumps Are The Best Materials

Welcome to download the newest Flydumps 300-207 VCE dumps: http://www.flydumps.com/300-207.html

Cisco 650-128 exam will get as a single Cisco 650-128 PDF or complete Cisco 650-128 testing engine as well as over 1000 other technical exam PDF and exam engine downloads. Tired of choosing Cisco 650-128 Configuration and Maintenance Exam material for preparing your Cisco 650-128 exam, just come to Flydumps Cisco 650-128 exam sample questions page for all the real Q&As. Flydumps Cisco experts and specialists have created 84 realCisco 650-128 exam Q&As for your learning. More, with our customers’ feedback, we have helped many candidates pass Cisco 650-128 exam easily.

QUESTION NO: 1
Which of these trends is the main driver toward smart grid technology?
A. increased supply, which requires the integration of distributed generation sources
B. reduced demand, which causes an increase in demand and peak load
C. compliance with regulations involving government funding and rules
D. increased carbon footprint
Answer: C
QUESTION NO: 2
How many levels or types of priority can be assigned on a Cisco TAC case?
A. 1
B. 2
C. 4
D. 3
Answer: C
QUESTION NO: 3
Which statement reflects the overall Cisco Smart Grid vision?
A. Sell the existing Cisco IP-based products from end-to-end of our utility customer’s smart grid deployments.
B. Design and architect an end-to-end communications infrastructure that is integrated with the power grid.
C. Integrate intelligent routing protocols into existing electrical grids.
D. Create a single infrastructure for unified communications from electrical generation plants to all primary and secondary substations.
Answer: D
QUESTION NO: 4
Which of these is a grouping of elements that are part of the Cisco Substation Automation

If you fail in Cisco 650-128 exam test with Cisco 650-128 exam dumps, we promise to give you full refund! You only need to scan your Cisco 650-128 exam score report to us together with your receipt ID. After our confirmation, we will give you full refund in time.Or you can choose to charge another IT exam Q&As instead of Cisco 650-128 exam dumps.Useful Cisco certifications exam dumps are assured with us.If our Cisco 650-128 exam dumps can’t help you pass Cisco 650-128 exam,details will be sent before we send the exam to you.We don’t waste our customers’ time and money! Trusting www.flydumps.com is your best choice!

Flydumps 300-207 dumps with PDF + Premium VCE + VCE Simulator: http://www.flydumps.com/300-207.html

CheckPoint CheckPoint 156-915 Demo Material, 100% Real CheckPoint 156-915 PDF On StoreCheckPoint CheckPoint 156-915 Demo Material, 100% Real CheckPoint 156-915 PDF On Store

Welcome to download the newest Pass4itsure 156-915 VCE dumps: https://www.pass4itsure.com/156-915.html

Confronted any fiercer along with fiercer competitors in IT planet, are you terrific strain? Certainly, you are doing. Subsequently you’d far better find the CheckPoint 156-915 to be able to take your job. Right now, A growing number of CheckPoint 156-915 certification will be can come staying to be able to in life. It is terrific in the event that contenders get CheckPoint 156-915 exam sample questions directly from Cisco  Higher education. Candidates can easily gain more experience and knowledge during Cisco University since masters/ specialists will supply training towards the contenders. Before you take CheckPoint 156-915 exam sample questions, any main element how the contenders want to do will be to know about the CheckPoint 156-915 Study guide test training and that will make this happen for any very clear information to learn any CheckPoint 156-915 exam sample questions. Each of the CheckPoint 156-915 Study guide test information and various details are accessible immediately inside Cisco site.

QUESTION 111
When synchronizing clusters, which of the following statements is NOT true?
A. User Authentication connections will be lost by the cluster
B. An SMTP resource connection using CVP will be maintained by the cluster
C. Only cluster members running on the same OS platform can be synchronized
D. In the case of a failover, accounting information on the failed member may be lost despite a properly working synchronization

Correct Answer: B
QUESTION 112
Identify the correct steps performed by SmartUpdate to upgrade a remote Security Gateway. After selecting “Packages: add?from CD”, the:
A. Entire Contents of the CD are copied to the packages directory on the selected remote security gateway
B. Selected Package is copied to the packages directory on the selected remote security gateway
C. Selected package is copied to the package repository on the SmartCenter Server
D. Entire contents of the CD are copied to the Package Repository on the SmartCenter Server

Correct Answer: C
QUESTION 113
What is the command in SecurePlatform Expert shell used to add routes without the use of sysconfig or the WebUI?
A. ip route
B. sysconfig route
C. ifroute
D. ifconfig

Correct Answer: A
QUESTION 114
You want to upgrade a cluster with two members to VPN-1 NGX R65. The SmartCenter server and both
members are version VPN-1/Firewall-1 NG FP3, with the latest Hotfix.
What is the correct upgrade procedure?

1.
Change the version, in the General Properties of the gateway-cluster object

2.
Upgrade the SmartCenter Server and reboot after upgrade

3.
Run cpstop on one member, while leaving the other member running. Upgrade one member at a time and reboot after upgrade

4.
Reinstall the Security Policy:
A. 3,2,1,4
B. 2,3,1,4
C. 1,3,2,4
D. 2,4,3,1
Correct Answer: B
QUESTION 115
Which utility allows you to configure the DHCP service on SecurePlatform from the command line?
A. Cpconfig
B. WebUI
C. Ifconfig
D. Sysconfig
Correct Answer: D
QUESTION 116
In ClusterXL, which of the following processes are defined by default as critical devices?
A. fwd
B. assid
C. cpp
D. fwm

Correct Answer: A
QUESTION 117
Which command line interface utility allows the administrator to verify the name and timestamp of the Security Policy currently installed on a firewall module?
A. fw stat
B. fw ctl pstat
C. cpstat fwd
D. fw ver

Correct Answer: A
QUESTION 118
The command fw fetch causes the:
A. Security gateway to retrieve the compiled policy and inspect code from the SmartCenter Server and install it to the kernel
B. SmartCenter Server to retrieve the debug logs of the target security gateway
C. SmartCenter Server to retrieve the IP addresses of the target security gateway
D. Security Gateway to retrieve the user database information from the tables on the SmartCenter Server

Correct Answer: A
QUESTION 119
Where is it necessary to configure historical records in SmartView Monitor to generate Express reports in Eventia Reporter?
A. In Eventia Reporter, under Standard > Custom
B. In Eventia Reporter, under Express> Network Activity
C. In SmartView Monitor, under Global Properties > Log and Masters
D. In SmartDashboard, the SmartView Monitor page in the VPN-1 Security Gateway object
Correct Answer: D
QUESTION 120
SmartCenter Server
A. Purges the current log file and starts a new log file
B. Saves the current log file names the log file by data and time and starts a new log file
C. Prompts you to enter a filename, then saves the log file
D. Purges the current log and prompts you for the new log’s mode
Correct Answer: B
QUESTION 121
Central License Management allows a Security Administrator to perform which of the following functions?
A. 2,3,4,5
B. Attach and/or delete only NGX Central Licenses to a remote module (not Local Licenses)
C. 2,5,6
D. Check for expired licenses
E. 1,2,5,6
F. Sort licenses and view license properties
G. Delete both NGX Local licenses and Central licenses from a remote module
H. 1,2,3,4,5
I. Add or remove a license to or from the license repository
J. Attach both NGX Central Local licenses to a remote module

Correct Answer: D
QUESTION 122
Which of the following is NOT true for clientless VPN?
A. The Gateway accepts any encryption method that is proposed by the client and supported in the VPN
B. Secure communication is provided between clients and servers that support HTTP
C. User Authentication is supported
D. The Gateway can enforce the use of strong encryption

Correct Answer: B
QUESTION 123
Control connections between the SmartCenter Server and the Gateway are not encryptd by the VPN Community. How are these connections secured?
A. They are not encrypted but are authenticated by the Gateway
B. They are secured by PPTP
C. They are encrypted and authenticated using SIC
D. They are not secured

Correct Answer: C
QUESTION 124
Which VPN-1 NGX R65 component displays the number of packets accepted, rejected and dropped on a specific Security Gateway, in real time?
A. Eventia Analyzer
B. SmartView Status
C. SmartUpdate
D. SmartView Monitor
Correct Answer: A
QUESTION 125
What happens when you select File > Export from the SmartView Tracker Menu?
A. Current logs are exported to a new *.log file
B. Exported log entries are deleted from fw.log
C. Logs in fw.log are exported to a file that can be opened by Microsoft Excel
D. Exported log entries are still viewable in SmartView Tracker
Correct Answer: C
QUESTION 126
Where do you enable popup alerts for SmartDefense settings that have detected suspicious activity?
A. In SmartView Monitor, Select Tools > Alerts
B. In SmartView Tracker, Select tools > Custom commands
C. In SmartDashboard, select global properties > Log and Alert > Alert commands
D. In SmartDashboard, edit the gateway object, select SmartDefense > Alerts

Correct Answer: A QUESTION 127
Which of the following command is a CLI command for VPN-1 NGX R65?
A. fw tab -u
B. fw merge
C. fw shutdown
D. fwprint

Correct Answer: A QUESTION 128
Which SmartConsole component can administrators use to track remote administrative activities?
A. Eventia Reporter
B. SmartView Monitor
C. SmartView Tracker
D. The WebUI

Correct Answer: D

Flydumps CheckPoint 156-915 exam dumps are audited by our certified subject matter experts and published authors for development.Flydumps CheckPoint 156-915 exam dumps are one of the highest quality CheckPoint 156-915 Q&As in the world. It covers nearly 96% real questions and answers, including the entire testing scope. Flydumps guarantees you pass CheckPoint 156-915 exam at first.

Pass4itsure 156-915 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/156-915.html

Checkpoint 156-816 Exam Sample, Useful Checkpoint 156-816 Vce Files With High QualityCheckpoint 156-816 Exam Sample, Useful Checkpoint 156-816 Vce Files With High Quality

Welcome to download the newest Pass4itsure c4040-226 VCE dumps: http://www.pass4itsure.com/c4040-226.html

Technicians know the instruments and test setups. Engineers need good writing and verbal skills. Technicians need to know the Checkpoint 156-816 of real measurements. If you want to succeed as part of your work and even acquire change among the different opposition then simply can come together with adhere to each of our Flydumps Checkpoint 156-816 exam sample questions. All applicants have to be competent in the fundamentals, i.e., Flydumps Checkpoint 156-816 exam sample questions, as well as the specifications which apply to their particular specialty. Flydumps Checkpoint 156-816 exam sample questions, Checkpoint 156-816 Exam has unified the performance tiers into a single file system, consolidating its compositing, computer graphics and stop motion workflows onto a single, shared storage resource, streamlining production operations and improving IT efficiency.

QUESTION 111
In a VSX Gateway cluster, which of the following objects are available by default as installation targets for the Management Virtual System?
A. Internal Virtual Switch cluster object
B. Individual Virtual Systems for each Customer’s cluster member
C. Virtual System cluster of each Customer
D. External Virtual Router cluster object
E. External Virtual Switch cluster object

Correct Answer: D
QUESTION 112
Which of the following VLAN membership types is considered explicit in its propagation?
A. Route-based
B. MAC address-based
C. Port-based
D. Session-based
E. State-based

Correct Answer: C
QUESTION 113
When Virtual Systems are deployed in Bridge mode, they use ____________ to detect failures and forward traffic to another Virtual System in a cluster?
A. BPDU
B. MPLS
C. VRRP
D. OSPF
E. STP
Correct Answer: E
QUESTION 114
Which of the following can function as a Management Server for a VSX Gateway?
A. Provider-1 NGX: Multi -Log Monitor
B. SmartCenter Server
C. Check Point Integrity
D. Security Management Portal
E. VPN-1/FireWall-1 Small Office

Correct Answer: B
QUESTION 115
Which of the following statements is TRUE concerning a VSX NGX deployment?
A. A separate management interface is required for a management network to access and control a VSX Gateway.
B. Multiple VSX Administrators can be configured with granular permission control in a SmartCenter Server management environment.
C. VSX Administrators can manage VSX Gateways and clusters through the Internet. No special management interface is required.
D. The functionality of VSX NGX is based on NG FP0.
E. All VSX virtual devices now share all functions of a standard NGX Security Gateway.

Correct Answer: C
QUESTION 116
Consider the following scenario: You have two VSX Gateways configured for High Availability. Each has one dedicated management interface, one synchronization interface, one external interface, and two interfaces used to connect to protected customer networks. How many cluster interfaces do you have in this configuration?
A. Three; one Management Virtual System cluster, one External Virtual Router cluster, and one Virtual System cluster containing both customer Virtual Systems
B. Five; one VSX Gateway cluster, one Management Virtual System Cluster, one External Virtual Router cluster, and two Virtual System clusters
C. Two; one External Virtual Router cluster, and one cluster containing all Virtual Systems
D. One; one VSX cluster containing all components
E. Four; one Management Virtual System cluster, one External Virtual Router cluster, and two Virtual System clusters

Correct Answer: B
QUESTION 117
Which of the following interfaces are configured by running sysconfig, during installation of a VSX Gateway in a High Availability environment?
A. Synchronization interface
B. Dedicated Customer interface
C. External interface
D. Management interface
E. Any configured VLAN

Correct Answer: D
QUESTION 118
Which process uses an encrypted TCP connection to perform Full Synchronization of VSX Gateways in a cluster?
A. cpd
B. srd
C. fwd
D. synd
E. vpnd

Correct Answer: C
QUESTION 119
Which of the following is NOT a type of physical interface seen in a VSX Gateway?
A. Warp
B. Internal
C. Dedicated management
D. External
E. Synchronization

Correct Answer: A
QUESTION 120
Which of the following virtual devices will NOT fail over, if its interface fails in a VSX High Availability configuration?
A. Virtual System in Bridge mode
B. External Virtual Router
C. Internal Virtual Router
D. Virtual System with VLAN interfaces
E. Management Virtual System interface

Correct Answer: A
QUESTION 121
Both SmartCenter Server and Provider-1 can be used for central configuration, management, and monitoring of multiple VSX Gateways and Virtual Systems. What criteria are used to decide which management model is used?
A. Licensing restrictions and costs, administrative requirements, and operation model
B. The size of the deployment and planned expansion, administrative requirements, and security model
C. The size of the deployment and planned expansion, end-user requirements, operation model, and licensing restrictions
D. The size of the deployment and planned expansion, administrative requirements, operation model, and licensing restrictions
E. The size of the deployment and planned expansion, end-user requirements, and security model

Correct Answer: D
QUESTION 122
The External Virtual Router is associated with a dedicated interface. It is considered to be which type of interface?
A. Warp
B. Synchronization
C. Virtual
D. Physical
E. Symbolic

Correct Answer: D
QUESTION 123
Security Policies enforced by Virtual Systems are applied to __________ connected to the Virtual IP Stack.
A. All interfaces
B. Virtual interfaces
C. Physical interfaces
D. Warp and virtual interfaces
E. Warp interfaces

Correct Answer: A
QUESTION 124
What type of synchronization happens when a Gateway joins a VSX cluster?
A. Partial Synchronization
B. Alpha Synchronization
C. Delta Synchronization
D. Dynamic Synchronization
E. Full Synchronization

Correct Answer: E
QUESTION 125
If you want your customer’s Virtual Systems to give protected hosts access to and from the Internet, which of the following must be configured as a public IP address?
A. Default Gateway IP address of the Virtual Switch
B. Main IP of the customer’s Virtual System
C. Main IP of the Virtual Switch
D. Default Gateway IP address of the Management Virtual System
E. Main IP of the Management Virtual System

Correct Answer: B
QUESTION 126
What is required to prevent loops in Virtual Systems in a Cluster XL environment?
A. BPDU
B. MPLS
C. STP
D. VRRP
E. OSPF

Correct Answer: C
QUESTION 127
When configuring VSX Gateway clustering, the VSX Administrator assigns a unique __________ to each VSX Gateway in the cluster.
A. Synchronization interval
B. Management Server
C. Initial state (Active/Standby)
D. Name
E. Subnet mask

Correct Answer: D
QUESTION 128
You are configuring source-based routing in a VSX Gateway deployment with both External and Internal Virtual Routers. Which of the following functions cannot be configured for the Virtual Systems?
A. Virtual System clustering
B. Anti-spoofing measures
C. Network Address Translation
D. Remote access VPNs
E. Intranet VPNs

Correct Answer: B
QUESTION 129
A Virtual System in Bridge mode:
A. Routes traffic based on layer-3 information.
B. Forwards all traffic received from a switch.
C. Can participate in a VPN.
D. Can perform Network Address Translation.
E. Uses VRRP to manage failover.

Correct Answer: B
QUESTION 130
TRUE or FALSE. A Virtual System in Bridge mode can enforce anti-spoofing definitions.
A. True, anti-spoofing must be manually defined in bridge mode.
B. True, as long as the Virtual System has more than two interfaces defined.
C. True, as long as Network Address Translation is performed.
D. True, anti-spoofing measures are defined automatically in Bridge mode.
E. False, anti-spoofing cannot be configured for Virtual Systems in Bridge mode.

Correct Answer: A
QUESTION 131
Which of the following components controls the synchronization interface for each VSX Gateway?
A. External Virtual Router
B. Management Virtual System
C. Internal Virtual Router
D. VSX Management Server
E. Network Synchronization Server

Correct Answer: B
QUESTION 132
Which of the following VSX Gateway components are unique to, and NOT shared by, each Virtual System?
A. VSX Policy Editor
B. Context Identification Module
C. VSX Inspection Module
D. VSX Management Server
E. Virtual Router
Correct Answer: C
QUESTION 133
When configuring a new Virtual System for your VSX Gateway configuration, what should you do first?
A. Create a new Customer and CMA, to be used as the Virtual System’s Management Server.
B. Open the Admin CMA SmartDashboard, and create a new CMA object to be used as the Virtual System’s Management Server.
C. Add a new Virtual System to the Main Customer, so that the Admin CMA can be used as the Management Server.
D. Open the Global SmartDashboard, and create a new Virtual System object.
E. Open the Admin CMA SmartDashboard, and create a new Virtual System object.

Correct Answer: A
QUESTION 134
Which of the following is a Multi-Context process?
A. cpd
B. synd
C. vsxd
D. gwd
E. psd

Correct Answer: A
QUESTION 135
The __________ interface is configured in a VLAN environment, to allow multiple Virtual Systems to share a single physical interface on a VSX Gateway.
A. Synchronization
B. Warp
C. Symbolic
D. Physical
E. Virtual

Correct Answer: E
QUESTION 136
What is the difference between Single-Context and Multi-Context processes?
A. Single-Context processes are implemented in standard firewall deployments, while only Multi-Context processes are implemented in VSX Gateway deployments.
B. Single-Context processes are shared between VSX Gateways in an HA configuration, while Multi-Context processes are shared between VSX Gateways in a Load Sharing environment.
C. Single-Context processes are ones in which all Virtual Systems share, while Multi-Context processes are unique to each Virtual System.
D. Single-Context processes are implemented in a single VSX Gateway environment, while Multi-Context processes are only implemented in VSX Gateway High Availability (HA).
E. Single-Context processes are unique to each Virtual System on a Gateway, while Multi-Context processes are ones in which all Virtual Systems share.

Correct Answer: E
QUESTION 137
Which of the following is the only interface configured by running sysconfig, during the installation of a VSX Gateway in a single Gateway environment?
A. Synchronization interface
B. Dedicated Customer interface
C. Internal Virtual Router interface
D. Management interface
E. External interface

Correct Answer: D
QUESTION 138
In a standard VSX configuration, each Virtual System is configured with which of the following interfaces?
A. One leading to the Management Virtual System, and one leading to the Internal Virtual Router/Switch
B. One leading to the Management Virtual System, and one leading to the External Virtual Router
C. One leading to a router on the external network, and one for the physical interface leading to the protected network
D. One leading to the External Virtual Router/Switch, and one for the physical interface leading to the protected network
E. One for the physical interface leading to the protected network, and one leading to the Management Virtual System

Correct Answer: D
QUESTION 139
When configuring __________, the interface leading to the External Virtual Router should be set as the main IP address, and should be publicly routable.
A. Anti-spoofing
B. Virtual Systems in Bridge mode
C. Network Address Translation
D. A Virtual Switch
E. VLAN trunking interfaces

Correct Answer: C
QUESTION 140
At installation, the _________ is bound to all configured physical interfaces of a VSX Gateway, UNLESS the interfaces are specifically assigned to another component.
A. VSX Management Server
B. External Virtual Router
C. Synchronization Network
D. Management Virtual System
E. Internal Virtual Router
Correct Answer: D
Worried about Checkpoint 156-816 exam pass results? Adopt most reliable way of exam preparation that is Checkpoint 156-816 exam Questions & Answers with explanations to get reliable Checkpoint 156-816 exam pass result.Flydumps definitely guarantees it!

Pass4itsure c4040-226 dumps with PDF + Premium VCE + VCE Simulator: http://www.pass4itsure.com/c4040-226.html