Tag: 156-215 study guide
Your worries about CheckPoint 156-215 exam complexity no more exist because Flydumps is here to serves as a guide to help you to pass the CheckPoint 156-215 exam. All the exam questions and answers is the latest and covering each and every aspect of CheckPoint 156-215 exam.It 100% ensure you pass the exam without any doubt.
QUESTION 50
Which utility allows you to configure the DHCP service on SecurePlatform from the command line?
A. cpconfig
B. ifconfig
C. dhcp_cfg
D. sysconfig
Correct Answer: D
QUESTION 51
The third-shift Administrator was updating Security Management Server access settings in Global Properties and testing. He managed to lock himself out of his account. How can you unlock this account?
A. Delete the file admin.lock in the Security Management Server directory $FWDIR/tmp/.
B. Type fwm lock_admin -u <account name> from the Security Management Server command line.
C. Type fwm unlock_admin -u from the Security Gateway command line.
D. Type fwm unlock_admin from the Security Management Server command line.
Correct Answer: B
QUESTION 52
The third-shift Administrator was updating Security Management Server access settings in Global Properties. He managed to lock all administrators out of their accounts. How should you unlock these accounts?
A. Reinstall the Security Management Server and restore using upgrade_import.
B. Delete the file admin.lock in the Security Management Server directory $FWDIR/tmp/.
C. Type fwm lock_admin -ua from the Security Management Server command line.
D. Login to SmartDashboard as the special cpconfig_admin user account; right-click on each administrator object and select unlock.
Correct Answer: C
QUESTION 53
You are the Security Administrator for ABC-Corp. A Check Point Firewall is installed and in use on SecurePlatform. You are concerned that the system might not be retaining your entries for the interfaces and routing configuration. You would like to verify your entries in the corresponding file(s) on SecurePlatform. Where can you view them? Give the BEST answer.
A. /etc/conf/route.C
B. /etc/sysconfig/network-scripts/ifcfg-ethx
C. /etc/sysconfig/netconf.C
D. /etc/sysconfig/network
Correct Answer: C
QUESTION 54
When using SecurePlatform, it might be necessary to temporarily change the MAC address of the interface eth 0 to 00:0C:29:12:34:56. After restarting the network the old MAC address should be active. How do you configure this change?
A. Edit the file /etc/sysconfig/netconf.C and put the new MAC address in the field
B. As expert user, issue these commands: # IP link set eth0 down # IP link set eth0 addr 00:0C:29:12:34:56 # IP link set eth0 up
C. Open the WebUI, select Network > Connections > eth0. Place the new MAC address in the field Physical Address, and press Apply to save the settings.
D. As expert user, issue the command: # IP link set eth0 addr 00:0C:29:12:34:56
Correct Answer: B
QUESTION 55
Several Security Policies can be used for different installation targets. The Firewall protecting Human Resources’ servers should have its own Policy Package. These rules must be installed on this machine and not on the Internet Firewall. How can this be accomplished?
A. A Rule Base is always installed on all possible targets. The rules to be installed on a Firewall are defined by the selection in the Rule Base row Install On.
B. A Rule Base can always be installed on any Check Point Firewall object. It is necessary to select the appropriate target directly after selecting Policy > Install on Target.
C. When selecting the correct Firewall in each line of the Rule Base row Install On, only this Firewall is shown in the list of possible installation targets after selecting Policy > Install on Target.
D. In the menu of SmartDashboard, go to Policy > Policy Installation Targets and select the correct firewall via Specific Targets.
Correct Answer: D
QUESTION 56
Where is the IPSO Boot Manager physically located on an IP Appliance?
A. On the platform’s BIOS
B. In the directory /nvram
C. On an external jump drive
D. On built-in compact Flash memory
Correct Answer: D
QUESTION 57
How is wear on the flash storage device mitigated on diskless appliance platforms?
A. The external PCMCIA-based flash extension has the swap file mapped to it, allowing easy replacement.
B. A RAM drive reduces the swap file thrashing which causes fast wear on the device.
C. Issue FW-1 bases its package structure on the Security Management Server, dynamically loading when the firewall is booted.
D. PRAM flash devices are used, eliminating the longevity.
Correct Answer: B
QUESTION 58
Your R76 primary Security Management Server is installed on GAiA. You plan to schedule the Security Management Server to run fw logswitch automatically every 48 hours. How do you create this schedule?
A. Create a time object, and add 48 hours as the interval. Select that time object’s Global Properties > Logs and Masters window, to schedule a logswitch.
B. Create a time object, and add 48 hours as the interval. Open the primary Security Management Server object’s Logs and Masters window, enable Schedule log switch, and select the Time object.
C. On a SecurePlatform Security Management Server, this can only be accomplished by configuring the command fw logswitch via the cron utility.
D. Create a time object, and add 48 hours as the interval. Open the Security Gateway object’s Logs and Masters window, enable Schedule log switch, and select the Time object.
Correct Answer: B
QUESTION 59
Which of the following methods will provide the most complete backup of an R75 configuration?
A. Execute command upgrade_export
B. Database Revision Control
C. Policy Package Management
D. Copying the directories $FWDIR\conf and $CPDIR\conf to another server
Correct Answer: A
QUESTION 60
Which of the following commands can provide the most complete restoration of a R76 configuration?
A. cpinfo -recover
B. fwm dbimport -p <export file>
C. upgrade_import
D. cpconfig
Correct Answer: C
QUESTION 61
When restoring R76 using the command upgrade_import, which of the following items are NOT restored?
A. Licenses
B. SIC Certificates
C. Global properties
D. Route tables
Correct Answer: D
QUESTION 62
Your organization’s disaster recovery plan needs an update to the backup and restore section to reap the new distributed R76 installation benefits. Your plan must meet the following required and desired objectives:
Required ObjectivE.
The Security Policy repository must be backed up no less frequently than
every 24 hours.
Desired ObjectivE.
The R76 components that enforce the Security Policies should be backed up at
least once a week.
Desired ObjectivE.
Back up R76 logs at least once a week.
Your disaster recovery plan is as follows:
-Use the cron utility to run the command upgrade_export each night on the Security Management Servers.
–
Configure the organization’s routine back up software to back up the files created by the Checkpoint 156-215.13 Exam BrainDumps.com 25 command upgrade_export.
–
Configure the GAiA back up utility to back up the Security Gateways every Saturday night.
-Use the cron utility to run the command upgrade_export each Saturday night on the log servers.
–
Configure an automatic, nightly logswitch.
–
Configure the organization’s routine back up software to back up the switched logs every night.
Upon evaluation, your plan:
A. Meets the required objective and only one desired objective.
B. Meets the required objective but does not meet either desired objective.
C. Meets the required objective and both desired objectives.
D. Does not meet the required objective.
Correct Answer: C
QUESTION 63
Your company is running Security Management Server R76 on GAiA, which has been migrated through each version starting from Check Point 4.1. How do you add a new administrator account?
A. Using cpconfig on the Security Management Server, choose Administrators
B. Using SmartDashboard, under Users, select Add New Administrator
C. Using the Web console on SecurePlatform under Product configuration, select Administrators
D. Using SmartDashboard or cpconfig
Correct Answer: B
QUESTION 64
Peter is your new Security Administrator. On his first working day, he is very nervous and enters the wrong password three times. His account is locked. What can be done to unlock Peter’s account? Give the BEST answer.
A. It is not possible to unlock Peter’s account. You have to install the firewall once again or abstain
B. You can unlock Peter’s account by using the command fwm unlock_admin -u Peter on the Security Gateway.
C. You can unlock Peter’s account by using the command fwm lock_admin -u Peter on the Security Management Server
D. You can unlock Peter’s account by using the command fwm unlock_admin -u Peter on the Security Management Server
Correct Answer: C QUESTION 65
Where can you find the Check Point’s SNMP MIB file?
A. $CPDIR/lib/snmp/chkpt.mib
B. There is no specific MIB file for Check Point products.
C. $FWDIR/conf/snmp.mib
D. It is obtained only by request from the TAC.
Correct Answer: A
QUESTION 66
You want to generate a cpinfo file via CLI on a system running GAiA. This will take about 40 minutes since the log files are also needed. What action do you need to take regarding timeout?
A. Log in as Administrator, set the timeout to one hour with the command idle 60 and start cpinfo.
B. Log in as the default user expert and start cpinfo.
C. No action is needed because cpshell has a timeout of one hour by default.
D. Log in as admin, switch to expert mode, set the timeout to one hour with the command, idle 60, then start cpinfo.
Correct Answer: A
QUESTION 67
Many companies have defined more than one administrator. To increase security, only one administrator should be able to install a Rule Base on a specific Firewall. How do you configure this?
A. Define a permission profile in SmartDashboard with read/write privileges, but restrict it to all other firewalls by placing them in the Policy Targets field. Then, an administrator with this permission profile cannot install a policy on any Firewall not listed here.
B. Put the one administrator in an Administrator group and configure this group in the specific Firewall object in Advanced > Permission to Install.
C. Right-click on the object representing the specific administrator, and select that Firewall in Policy Targets.
D. In the object General Properties representing the specific Firewall, go to the Software Blades product list and select Firewall. Right-click in the menu, select Administrator to Install to define only this administrator.
Correct Answer: B
QUESTION 68
What is the officially accepted diagnostic tool for IP Appliance Support?
A. ipsoinfo
B. cpinfo
C. uag-diag
D. CST
Correct Answer: D
QUESTION 69
ALL of the following options are provided by the SecurePlatform sysconfig utility, EXCEPT:
A. Export setup
B. Time & Date
C. DHCP Server configuration
D. GUI Clients
Correct Answer: D QUESTION 70
Which of the following options is available with the SecurePlatform cpconfig utility?
A. Time & Date
B. GUI Clients
C. DHCP Server configuration
D. Export Setup
Correct Answer: B QUESTION 71
Which command would provide the most comprehensive diagnostic information to Check Point Technical Support?
A. cpstat – date.cpstat.txt
B. fw cpinfo
C. cpinfo -o date.cpinfo.txt
D. diag
Correct Answer: C QUESTION 72
Which of the following statements accurately describes the command snapshot?
A. snapshot creates a Security Management Server full system-level backup on any OS.
B. snapshot stores only the system-configuration settings on the Gateway.
C. A Gateway snapshot includes configuration settings and Check Point product information from the remote Security Management Server.
D. snapshot creates a full OS-level backup, including network-interface data, Check Point product information, and configuration settings during an upgrade of a SecurePlatform Security Gateway.
Correct Answer: D QUESTION 73
How do you recover communications between your Security Management Server and Security Gateway if you lock yourself out through a rule or policy mis-configuration?
A. fw delete all.all@localhost
B. fw unload policy
C. fwm unloadlocal
D. fw unloadlocal
Correct Answer: D QUESTION 74
How can you check whether IP forwarding is enabled on an IP Security Appliance?
A. clish -c show routing active enable
B. ipsofwd list
C. cat /proc/sys/net/ipv4/ip_forward
D. echo 1 > /proc/sys/net/ipv4/ip_forward
Correct Answer: B QUESTION 75
Which command allows you to view the contents of an R76 table?
A. fw tab -s <tablename>
B. fw tab -t <tablename>
C. fw tab -x <tablename>
D. fw tab -a <tablename>
Correct Answer: B
QUESTION 76
Which of the following tools is used to generate a Security Gateway R76 configuration report?
A. infoCP
B. cpinfo
C. infoview
D. fw cpinfo
Correct Answer: B
QUESTION 77
Which of the following is a CLI command for Security Gateway R76?
A. fw merge
B. fw tab -u
C. fw shutdown
D. fwm policy_print <policyname>
Correct Answer: B
QUESTION 78
You are the Security Administrator for MegaCorp. A Check Point firewall is installed and in use on a platform using GAiA. You have trouble configuring the speed and duplex settings of your Ethernet interfaces. Which of the following commands can be used in Expert Mode to configure the speed and duplex settings of an Ethernet interface and will survive a reboot? Give the BEST answer.
A. eth_set
B. mii_tool
C. ifconfig -a
D. ethtool
Correct Answer: A
QUESTION 79
Which command enables IP forwarding on IPSO?
A. echo 1 > /proc/sys/net/ipv4/ip_forward
B. ipsofwd on admin
C. echo 0 > /proc/sys/net/ipv4/ip_forward
D. clish -c set routing active enable
Correct Answer: B
QUESTION 80
When you change an implicit rule’s order from Last to First in Global Properties, how do you make the change take effect?
A. Run fw fetch from the Security Gateway.
B. Select Install Database from the Policy menu.
C. Reinstall the Security Policy.
D. Select Save from the File menu.
Correct Answer: C QUESTION 81
The actual CheckPoint 156-215 exam questions and answers will sharpen your skills and expand your knowledge to obtain a definite success.save your money and time on your preparation for your CheckPoint 156-215 certification exam. You will find we are a trustful partner if you choose us as your assistance on your CheckPoint 156-215 certification exam. Now we add the latest CheckPoint 156-215 content and to print and share content.
FLYDUMPS bring you the best Checkpoint 156-215 exam preparation materials which will make you pass in the first attempt.And we also provide you all the Checkpoint 156-215 exam updates as Microsoft announces a change in its Checkpoint 156-215 exam syllabus,we inform you about it without delay.
QUESTION 30
Which utility allows you to configure the DHCP service on SecurePlatform from the command line?
A. sysconfig
B. dhcp_cfg
C. cpconfig
D. ifconfig
Correct Answer: A QUESTION 31
Which utility is necessary for reestablishing SIC?
A. fwm sic_reset
B. cpconfig
C. cplic
D. sysconfig
Correct Answer: B QUESTION 32
The third-shift Administrator was updating Security Management Server access settings in Global Properties. He managed to lock all administrators out of their accounts. How should you unlock these accounts?
A. Reinstall the Security Management Server and restore using upgrade_import.
B. Delete the file admin.lock in the Security Management Server directory $FWDIR/tmp/.
C. Type fwm lock_admin -ua from the Security Management Server command line.
D. Login to SmartDashboard as the special cpconfig_admin user account; right-click on each administrator object and select unlock.
Correct Answer: C QUESTION 33
The third shift administrator was updating security management server access setting in global properties. He managed to lock the entire Administrator out of their accounts. How should you unlock these accounts?
A. Logging to smart dash board as special cpconfig_admin account. Right click on each administrator object and select Unlock.
B. Type fwm lock_admin ua from the command line of the security management server
C. Reinstall the security management Server and restore using upgrade _imort
D. Delete the file admin .lock in the sfwdir/ tmp/directory of the security managem,ent server.
Correct Answer: B QUESTION 34
You are the Security Administrator in a large company called ABC. A Check Point Firewall is installed and in use on SecurePlatform. You are concerned that the system might not be retaining your entries for the interfaces and routing configuration. You would like to verify your entries in the corresponding file(s) on SecurePlatform. Where can you view them? Give the BEST answer.
A. /etc/conf/route.C
B. /etc/sysconfig/netconf.C
C. /etc/sysconfig/network-scripts/ifcfg-ethx
D. /etc/sysconfig/network
Correct Answer: B
QUESTION 35
When using SecurePlatform, it might be necessary to temporarily change the MAC address of the interface eth 0 to 00:0C:29:12:34:56. After restarting the network the old MAC address should be active. How do you configure this change?
A. Open the WebUI, select Network > Connections > eth0. Place the new MAC address in the field Physical Address, and press Apply to save the settings.
B. As expert user, issue these commands: # IP link set eth0 down # IP link set eth0 addr 00:0C:29:12:34:56 # IP link set eth0 up
C. As expert user, issue the command: # IP link set eth0 addr 00:0C:29:12:34:56
D. Edit the file /etc/sysconfig/netconf.c and put the new MAC address in the field (conf : (conns 🙁 conn :hwaddr (“00:0C:29:12:34:56”)
Correct Answer: B
QUESTION 36
Where is the IPSO Boot Manager physically located on an IP Appliance?
A. In the / nvram directory
B. On an external jump drive
C. On the platform’s BIOS
D. On built-in compact Flash memory
Correct Answer: D
QUESTION 37
ALL of the following options are provided by the SecurePlatform sysconfig utility, EXCEPT:
A. DHCP Server configuration
B. GUI Clients
C. Time & Date
D. Export setup
Correct Answer: B
QUESTION 38
Which of the following options is available with the SecurePlatform cpconfig utility?
A. GUI Clients
B. Time & Date
C. Export setup
D. DHCP Server configuration
Correct Answer: A QUESTION 39
Which command would provide the most comprehensive diagnostic information to Check Point Technical Support?
A. diag
B. cpinfo -o date.cpinfo.txt
C. netstat > date.netstat.txt
D. cpstat > date.cpatat.txt
Correct Answer: B QUESTION 40
How do you recover communications between your Security Management Server and Security Gateway if you lock yourself out via a rule or policy mis-configuration?
A. fw delete all.all@localhost
B. cpstop
C. fw unloadlocal
D. fw unload policy
Correct Answer: C QUESTION 41
How can you check whether IP forwarding is enabled on an IP Security Appliance?
A. clish c show routing active enable
B. echo 1 > /proc/sys/net/ipv4/ip_forwarding
C. ipsofwd list
D. cat/proc/sys/net/ipv4/ip_forward
Correct Answer: C QUESTION 42
For normal packet transmission of an accepted communication to a host protected by a Security Gateway, how many lines per packet are recorded on a packet analyzer like Wireshark using fw monitor?
A. 2
B. 4
C. 3
D. None
Correct Answer: B QUESTION 43
How can I verify the policy version locally installed on the Firewall?
A. fw ver
B. fw ctl iflist
C. fw ver -k
D. fw stat
Correct Answer: D QUESTION 44
If you run fw monitor without any parameters, what does the output display?
A. In /var/adm/monitor. Out
B. On the console
C. In /tmp/log/monitor out
D. In / var/log/monitor. out
Correct Answer: B QUESTION 45
Another administrator accidentally installed a Security Policy on the wrong firewall. Having done this, you are both locked out of the firewall that is called myfw1. What command would you execute on your system console on myfw1 in order for you to push out a new Security Policy?
A. fw dbloadlocal
B. fw unloadlocal
C. cpstop
D. fw ctl filter
Correct Answer: B QUESTION 46
Which of the following commands will completely remove the Security Policy from being enforced on a Security Gateway?
A. fw unload
B. fw unloadlocal
C. cpstop
D. fw unload local
Correct Answer: B QUESTION 47
Which of the following commands identifies whether or not a Security Policy is installed or the Security Gateway is operating with the initial policy?
A. fw monitor
B. fw ctl pstat
C. cp stat
D. fw stat
Correct Answer: D QUESTION 48
To monitor all traffic between a network and the Internet on a SecurePlatform Gateway, what is the BEST utility to use?
A. snoop
B. cpinfo
C. infoview
D. tcpdump
Correct Answer: D QUESTION 49
You are creating an output file with the following command:
fw monitor -e “accept (src=10.20.30.40 or dst=10.20.30.40);” -o ~/output Which tool do you use to analyze this file?
A. You can analyze it with Wireshark or Ethereal.
B. You can analyze the output file with any ASCI editor.
C. The output file format is CSV, so you can use MS Excel to analyze it.
D. You cannot analyze it with any tool as the syntax should be:fw monitor -e accept ([12,b]=10.20.30.40 or [16,b]=10.20.30.40); -o ~/output.
Correct Answer: A
QUESTION 50
You issue the fw monitor command with no arguments. Which of the following inspection points will be displayed?
A. Before the virtual machine, in the inbound direction
B. After the virtual machine, in the outbound direction
C. All inspection points
D. Before the virtual machine, in the outbound direction
Correct Answer: C
We help you do exactly that with our high quality Checkpoint 156-215 Certification using the above training materials.Regardless of whichever computer you have, you just need to download one of the many Checkpoint 156-215 PDF readers that are available for free.
Exam A
QUESTION 1
Which of the following are available SmartConsole clients which can be installed from the R76 Windows CD? Read all answers and select the most complete and valid list.
A. SmartView Tracker, CPINFO, SmartUpdate
B. SmartView Tracker, SmartDashboard, SmartLSM, SmartView Monitor
C. SmartView Tracker, SmartDashboard, CPINFO, SmartUpdate, SmartView Status
D. Security Policy Editor, Log Viewer, Real Time Monitor GUI
Correct Answer: A
QUESTION 2
You manage a global network extending from your base in Chicago to Tokyo, Calcutta and Dallas. Management wants a report detailing the current software level of each Enterprise class Security Gateway. You plan to take the opportunity to create a proposal outline, listing the most cost- effective way to upgrade your Gateways. Which two SmartConsole applications will you use to create this report and outline?
A. SmartLSM and SmartUpdate
B. SmartView Tracker and SmartView Monitor
C. SmartView Monitor and SmartUpdate
D. SmartDashboard and SmartView Tracker
Correct Answer: D
QUESTION 3
Your bank’s distributed R76 installation has Security Gateways up for renewal. Which SmartConsole application will tell you which Security Gateways have licenses that will expire within the next 30 days?
A. SmartView Tracker
B. SmartPortal
C. SmartUpdate
D. SmartDashboard
Correct Answer: A
QUESTION 4
When launching SmartDashboard, what information is required to log into R76?
A. User Name, Management Server IP, certificate fingerprint file
B. User Name, Password, Management Server IP
C. Password, Management Server IP
D. Password, Management Server IP, LDAP Server IP
Correct Answer: D
QUESTION 5
Message digests use which of the following?
A. SHA-1 and MD5
B. IDEA and RC4
C. SSL and MD4
D. DES and RC4
Correct Answer: C QUESTION 6
Which of the following is a hash algorithm?
A. DES
B. IDEA
C. MD5
D. 3DES
Correct Answer: A QUESTION 7
Which of the following uses the same key to decrypt as it does to encrypt?
A. Asymmetric encryption
B. Symmetric encryption
C. Certificate-based encryption
D. Dynamic encryption
Correct Answer: A QUESTION 8
You believe Phase 2 negotiations are failing while you are attempting to configure a site-to-site VPN with one of your firm’s business partners. Which SmartConsole application should you use to confirm your suspicions?
A. SmartDashboard
B. SmartView Tracker
C. SmartUpdate
D. SmartView Status
Correct Answer: C QUESTION 9
A digital signature:
A. Provides a secure key exchange mechanism over the Internet.
B. Automatically exchanges shared keys.
C. Guarantees the authenticity and integrity of a message.
D. Decrypts data to its original form.
Correct Answer: B QUESTION 10
Which component functions as the Internal Certificate Authority for R76?
A. Security Gateway
B. Management Server
C. Policy Server
D. SmartLSM
Correct Answer: C
Prüfung A QUESTION 1
Which of the following are available SmartConsole clients which can be installed from the R76 Windows CD? Read all answers and select the most complete and valid list.
A. SmartView Tracker, CPINFO, SmartUpdate
B. SmartView Tracker, SmartDashboard, SmartLSM, SmartView Monitor
C. SmartView Tracker, SmartDashboard, CPINFO, SmartUpdate, SmartView Status
D. Security Policy Editor, Log Viewer, Real Time Monitor GUI
Correct Answer: A QUESTION 2
You manage a global network extending from your base in Chicago to Tokyo, Calcutta and Dallas. Management wants a report detailing the current software level of each Enterprise class Security Gateway. You plan to take the opportunity to create a proposal outline, listing the most costeffective way to upgrade your Gateways. Which two SmartConsole applications will you use to create this report and outline?
A. SmartLSM and SmartUpdate
B. SmartView Tracker and SmartView Monitor
C. SmartView Monitor and SmartUpdate
D. SmartDashboard and SmartView Tracker
Correct Answer: C QUESTION 3
Your bank’s distributed R76 installation has Security Gateways up for renewal. Which SmartConsole application will tell you which Security Gateways have licenses that will expire within the next 30 days?
A. SmartView Tracker
B. SmartPortal
C. SmartUpdate
D. SmartDashboard
Correct Answer: C QUESTION 4
When launching SmartDashboard, what information is required to log into R76?
A. User Name, Management Server IP, certificate fingerprint file
B. User Name, Password, Management Server IP
C. Password, Management Server IP
D. Password, Management Server IP, LDAP Server IP
Correct Answer: B QUESTION 5
Message digests use which of the following?
A. SHA-1 and MD5
B. IDEA and RC4
C. SSL and MD4
D. DES and RC4 Correct Answer: A QUESTION 6
Which of the following is a hash algorithm?
A. DES
B. IDEA
C. MD5
D. 3DES
Correct Answer: C QUESTION 7
Which of the following uses the same key to decrypt as it does to encrypt?
A. Asymmetric encryption
B. Symmetric encryption
C. Certificate-based encryption
D. Dynamic Encryption
Correct Answer: B QUESTION 8
You believe Phase 2 negotiations are failing while you are attempting to configure a site-to-site VPN with one of your firm’s business partners. Which SmartConsole application should you use to confirm your suspicions?
A. SmartDashboard
B. SmartView Tracker
C. SmartUpdate
D. SmartView Status
Correct Answer: B QUESTION 9
A digital signature:
A. Provides a secure key exchange mechanism over the Internet.
B. Automatically exchanges shared keys.
C. Guarantees the authenticity and integrity of a message.
D. Decrypts data to its original form.
Correct Answer: C QUESTION 10
Which component functions as the Internal Certificate Authority for R76?
A. Security Gateway
B. Management Server
C. Policy Server
D. SmartLSM
Correct Answer: B
Exam A QUESTION 1
Which of the following statements about Bridge mode is TRUE?
A. When managing a Security Gateway in Bridge mode, it is possible to use a bridge interface for Network Address Translation.
B. Assuming a new installation, bridge mode requires changing the existing IP routing of the network.
C. All ClusterXL modes are supported.
D. A bridge must be configured with a pair of interfaces.
Correct Answer: D QUESTION 2
Which SmartConsole component can Administrators use to track remote administrative activities?
A. WebUI
B. Eventia Reporter
C. SmartView Monitor
D. SmartView Tracker
Correct Answer: D QUESTION 3
UDP packets are delivered if they are _________.
A. A legal response to an allowed request on the inverse UDP ports and IP
B. A Stateful ACK to a valid SYN-SYN-/ACK on the inverse UDP ports and IP
C. Reference in the SAM related Dynamic tables
D. Bypassing the Kernel by the “forwarding layer” of clusterXL
Correct Answer: A QUESTION 4
The Check Point Security Gateway’s virtual machine (kernel) exists between which two layers of the OSI model?
A. Session and Network layers
B. Application and Presentation layers
C. Physical and Datalink layers
D. Network and Datalink layers
Correct Answer: D QUESTION 5
The customer has a small Check Point installation which includes one Windows 2003 server as the SmartConsole and a second server running SecurePlatform as both Security Management Server and the Security Gateway. This is an example of a(n):
A. Unsupported configuration.
B. Hybrid Installation.
C. Distributed Installation.
D. Stand-Alone Installation.
Correct Answer: D QUESTION 6
The customer has a small Check Point installation which includes one Windows XP workstation as the SmartConsole, one Solaris server working as Security Management Server, and a third server running SecurePlatform as Security Gateway. This is an example of a(n):
A. Stand-Alone Installation.
B. Unsupported configuration
C. Distributed Installation.
D. Hybrid Installation.
Correct Answer: C QUESTION 7
You are a security architect and need to design a secure firewall, VPN and IPS solution. Where would be the best place to install IPS in the topology if the internal network is already protected?
A. On the firewall itself to protect all connected networks centrally.
B. On each network segment separately.
C. On the LAN is enough, the DMZ does not need to be protected.
D. In front of the firewall is enough.
Correct Answer: A QUESTION 8
You are installing a Security Management Server. Your security plan calls for three administrators for this particular server. How many can you create during installation?
A. Depends on the license installed on the Security Management Server
B. Only one with full access and one with read-only access
C. One
D. As many as you want
Correct Answer: C QUESTION 9
During which step in the installation process is it necessary to note the fingerprint for first-time verification?
A. When establishing SIC between the Security Management Server and the Gateway
B. When configuring the Security Management Server using cpconfig
C. When configuring the Security Gateway object in SmartDashboard
D. When configuring the Gateway in the WebUl
Correct Answer: B QUESTION 10
How can you recreate the account of the Security Administrator, which was created during initial installation of the Management Server on SecurePlatform?
A. Launch cpconfig and delete the Administrator’s account. Recreate the account with the same name.
B. Export the user database into an ASCII file with fwm dbexport. Open this file with an editor, and delete the Administrator Account portion of the file. You will be prompted to create a new account.
C. Type cpm -a, and provide the existing Administrator’s account name. Reset the Security Administrator’s password.
D. Launch SmartDashboard in the User Management screen, and delete the cpconfig administrator.
Correct Answer: A