Tag: ns0-194 free dumps

NS0-194 Exam Dumps [Study] Excellent NetApp NS0-194 Study MaterialNS0-194 Exam Dumps [Study] Excellent NetApp NS0-194 Study Material

I’m guessing you’re looking for the right NS0-194 study materials to prepare for the NetApp Certified Support Engineer exam, and our latest version of the NS0-194 exam dumps are there to help you learn.

New NS0-194 exam dumps for studying. To get it, you need to go to this page to download the NS0-194 exam dumps: https://www.pass4itsure.com/ns0-194.html There are 60 mock exam questions and answers to help you better study the actual NetApp NS0-194 exam.

Do I need to know about the NetApp Certified Support Engineer exam to pass?

Yes, you have to know about the NS0-194 exam. Here are the highlights.

Exam Code: NS0-194 NCSE
Exam Title: NetApp Certified Support Engineer
Exam Price: $150
Duration: 90 minutes
Passing score: 63%
Free questions: see below
Number of questions: 60
Official resources:

  • Introduction to NetApp Storage System Basic Components (WBT)
  • Introduction to Clustered Data ONTAP Architecture (WBT)
  • Introduction to Aggregates and FlexVols in Clustered Data ONTAP (WBT)
  • Introduction to Networking in Clustered Data ONTAP (WBT)
  • Introduction to High-Availability in Clustered Data ONTAP (WBT)
  • Introduction to Data Protection in Clustered Data ONTAP (WBT)

Valid study material: Pass4itSure NS0-194 exam dumps

Which are the best study materials for NS0-194 exam preparation?

You can choose to trust Pass4itSure.
Pass4itSure NS0-194 exam dumps Learning materials are valid, current, and accurate …

To reassure you, Pass4itSure offers an online download of free NS0-194 exam dumps where you can check the quality: https://drive.google.com/file/d/1S5iTJxwWWOkqzW22r9vLRcz0UJ21toRE/view?usp=sharing

NS0-194 free dumps questions answers

QUESTION # 1

You received the “CLUSTER ERROR: DISK/SHELF COUNT MISMATCH” AutoSupport message from an ONTAP cluster. When analyzing this message, which two should be inspected? (Choose two.)

A. drive paths
B. IOM firmware
C. drive firmware
D. SAS cabling

Correct Answer: AC

QUESTION # 2

A volume was accidentally deleted two hours ago by another administrator. No backups exist. In this scenario, what do you do to restore the data?

A. Use the ONTAP System Manager to recover the volume.
B. Use a volume snapshot to return the data to the active file system.
C. Use the volume recovery queue to restore the volume.
D. Use an aggregate snapshot to revert the aggregate to an earlier state.

Correct Answer: C

Reference: http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-vsmg%2FGUIDD4E85AB5-EEBB-44B4-A648-5B1B04FD5F85.html

QUESTION # 3

You have determined that an SFP+ has failed on one of your storage controllers. In this scenario, what do you use to determine which SFP+ should be replaced by NetApp Support?

A. NetApp Active IQ
B. Interoperability Matrix Tool
C. NetApp Documentation Center
D. Hardware Universe

Correct Answer: D

QUESTION # 4

While troubleshooting client access issues to a CIFS share, you notice that the issue only occurs when the data LIF that the clients are accessing is on a specific node in the cluster. In this scenario, which configuration should you review to determine why this issue is happening?

A. cluster health
B. Kerberos
C. share path
D. export policies

Correct Answer: B

Reference: https://library.netapp.com/ecm/ecm_download_file/ECMLP2426787

QUESTION # 5

You observe cyclic redundancy check (CRC) errors on a network port from a node in the cluster.
Which two components would you consider reseating or replacing before you perform actions on the physical port where the errors are reported from the node? (Choose two.)

A. SFP
B. cluster interconnect switch
C. up-stream switch
D. cable

Correct Answer: CD

QUESTION # 6

Your customer\’s MetroCluster has generated a “DISK REDUNDANCY FAILED” message.
Netapp-EmA:
Tue Jan 14 04:12:12 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’ failed.

Tue Jan 14 04:12:13 CET [netapp-EmA:rv.connection.torndown:info]: HA interconnect: cfo_rv1 is torn down on NIC 1.

Tue Jan 14 04:12:13 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’1 failed.

Tue Jan 14 04:12:15 CET [netapp-EmA:rv.connection.torndown:info]: HA interconnect: cfo_rv2 is torn down on NIC 1.

Tue Jan 14 04:12:18 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’2 failed.

Tue Jan 14 04:12:19 CET [netapp-EmA:bridge.removed:info]: FC-to_SAS bridge siteB_2:13.126L0 [ATTO
FibreBridge6500N 1.61] S/N [FB7500N111161] was removed Tue Jan 14 04:12:19 CET [netappEmA:bridge.removed:info]: FCto_SAS bridge siteB_2:5.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111160] was removed

Netapp-EmB:
Tue Jan 14 04:12:12 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’ failed.

Tue Jan 14 04:12:12 CET [netapp-EmB:rv.connection.torndown:info]: HA interconnect: cfo_rv2 is torn down on NIC 1.

Tue Jan 14 04:12:13 CET [netapp-EmB:rv.connection.torndown:info]: HA interconnect: cfo_rv1 is torn down on NIC 1.

Tue Jan 14 04:12:13 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’1 failed.

Tue Jan 14 04:12:18 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for \’cfo_rv\’2 failed.

Tue Jan 14 04:12:19 CET [netapp-EmB:bridge.removed:info]: FC-to_SAS bridge siteA_2:13.126L0 [ATTO
FibreBridge6500N 1.61] S/N [FB7500N111167] was removed Tue Jan 14 04:12:19 CET [netappEmB:bridge.removed:info]: FCto_SAS bridge siteA_2:5.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111164] was removed Referring to the messages shown in the exhibit for each node, which component is causing the problem?

A. the ATTO bridge on siteB_2
B. the SAN switch siteA_2
C. the SAN switch siteB_2
D. the ISL between site and site B\

Correct Answer: D

QUESTION # 7

A customer ordered a FAS2720 cluster with 8 TB SATA drives. The customer wants to use the Advanced Drive Partitioning (ADP) feature to avoid consuming the high-capacity drives for the root aggregate. Before you use the cluster setup, you issue the aggr status command and notice that ADP is not being used.

In this scenario, what would you use to implement ADP?

A. loader prompt
B. special boot menu
C. nodeshell
D. SP prompt

Correct Answer: A

QUESTION # 8

A customer will need to perform an upgrade from 9.0 to 9.4. Which feature of ONTAP enables non-disruptive hardware maintenance for this upgrade?

A. aggregate relocation
B. FlexVol
C. FlexGroup
D. RAID-TEC

Correct Answer: A

Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cmhacg%2FGUID-519510F4-AE00-4859-9706-217553D05FB9.html

QUESTION # 9

Which NetApp technology enables a volume to span across one or more aggregates and one or more NetApp nodes?

A. FlexVol
B. Flash Pool
C. Flash Cache
D. FlexGroup

Correct Answer: D

Reference: https://www.netapp.com/pdf.html?item=/media/17251-tr4571apdf.pdf (3)

QUESTION # 10

Test user “LAB\tester” can perform an operation in the CIFS share “HR” from the SVM “svm1”. However, the rest of the users from the HR department cannot perform the same operation. You want to determine why only “LAB\tester” can perform the operation.

In this scenario, which security trace filter accomplishes this task?

A. vserver security trace filter create -vserver svm1 -index 1 -protocol nfs -unix-name tester -trace-allow no
B. vserver security trace filter create -vserver svm1 -index 1 -protocol cifs -windows- name LAB\tester -trace-allow no
C. vserver security trace filter create -vserver svm1 -index 1 -protocol cifs -windows- name LAB\tester -trace-allow yes
D. vserver security trace filter create -vserver svm1 -index 1 -protocol nfs -unix-name tester -trace-allow yes

Correct Answer: C

QUESTION # 11

In ONTAP 9.6, activity on the command line is found in which log?

A. audit.log
B. messages.log
C. command-history.log
D. mgwd.log

Correct Answer: A

Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Overview_of_ONTAP_Logs

QUESTION # 12

A customer receives the message shown below in their EMS logs.
Tue Jun 27 18:34:18 CEST [netapp-ct1: cp_worker: wafl.cp.too long: error]: Aggregate AG1_NTAP_PROD experienced a long CP. Tue Jun 27 18:37:10 CEST Which two data sources do you use to explain this message? (Choose two.)

A. ONTAP System Manager
B. Performance Archive
C. Active IQ Unified Manager
D. mgwd.log

Correct Answer: AB

Reference: https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/First_steps_troubl
eshooting_wafl_exempt10%3A_wafl.cp.toolong%3Aerror

QUESTION # 13

What are two reasons to use VLANs in a NetApp storage solution? (Choose two.)

A. to isolate UDP traffic from TCP traffic
B. to isolate management traffic from other IP traffic
C. to isolate iSCSI traffic from NAS traffic
D. to isolate FC traffic from other IP traffic

Correct Answer: AC

Want more, need to get the full NS0-194 exam dumps, here.