Download Free VCE Files: CCNA, A+ Certification, MCSE – Cert4sure VMware [Free New VMware Version] Pass VMware VCP6.5-DCV 2V0-622D Exam Dumps | Download pass4itsure 2V0-622D vce pdf

[Free New VMware Version] Pass VMware VCP6.5-DCV 2V0-622D Exam Dumps | Download pass4itsure 2V0-622D vce pdf

Download free latest VMware 2V0-622D Premium Exam vce pdf. 100% Actual & Verified .
Data Center Virtualization Delta 2V0-622D Latest & Updated Exam Questions for candidates.
100% valid 2v0-622d Exam questions from Pass4itsure 2v0-622d dump! Welcome to download the latest and 100%
pass guarantee Pass4itsure 2v0-622d VCE and PDF dumps: https://www.pass4itsure.com/2v0-622d.htmlLatest pass4itsure 2V0-622D exam pdf on Google Drive shared : https://drive.google.com/file/d/121nJaysdTQEjyTUYq1ClSrpeQ9ffTRxq/view
VMware Certified Professional 6.5 – Data Center Virtualization Delta Exam: https://www.vmware.com/education-services/certification/vcp6-5-dcv-delta-exam.html

Free latest pass4itsure 2V0-622D practice exam (1-30)

QUESTION 1
When using “Cluster resource percentage” for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which
two values? (Choose two.)
A. Total vCPUs assigned to each VM.
B. Average CPU usage on each VM over time.
C. Memory reservations on each VM.
D. Total memory assigned to each VM.
E. Average active memory on each VM over time.
F. CPU reservations on each VM.
Correct Answer: CF

Explanation
Explanation/Reference:
vSphere HA uses the actual reservations of the virtual machines. If a virtual machine does not have reservations, meaning that the reservation is 0, a default of
0MB memory and 32MHz CPU is applied.
Computing the Current Failover Capacity
The total resource requirements for the powered-on virtual machines is comprised of two components, CPU and memory. vSphere HA calculates these values.
The CPU component by summing the CPU reservations of the powered-on virtual machines. If you have not specified a CPU reservation for a virtual machine, it is
assigned a default value of 32MHz (this value can be changed using the das.vmcpuminmhz advanced option.)
The memory component by summing the memory reservation (plus memory overhead) of each powered-on virtual machine.


QUESTION 2
By default, how often is the vCenter vpx user password automatically changed?
A. 15 days
B. 60 days
C. 30 days
D. 45 days
Correct Answer: C


QUESTION 3
Which two statements about vCenter HA are correct? (Choose two.)
A. ESXi 5.5 or later is required.
B. vCenter HA network latency between nodes must be less than 50 ms.
C. NFS datastore is supported.
D. It must be deployed on a 3 ESXi host cluster with DRS enabled.
Correct Answer: AC


QUESTION 4
Which metric in the Exhibit would identify high latency for a storage device?

A. QAVG/cmd
B. KAVG/cmd
C. DAVG/cmd
D. GAVG/cmd
Correct Answer: C


QUESTION 5
What availability mode does vCenter HA provide?A. Active-Passive
B. Active-Standby
C. Active-Active
D. Load-balanced
Correct Answer: A


QUESTION 6
Which are the two network requirements for a VMware vSAN 6.5 cluster? (Choose two.)
A. Multicast must be enabled on the physical switches and routers that handle vSAN traffic.
B. vSAN requires IPv6 only.
C. All hosts must have a dedicated 40GbE NIC.
D. The vSAN network supported IPv4 or IPv6.
E. vSAN requires IPv4 only.
Correct Answer: AD
Explanation
Explanation/Reference:
The vSAN network supports both IPv4 and IPv6.


QUESTION 7
Which three design requirements must be satisfied to enable RAID-6 objects in a VMware vSAN cluster? (Choose three.)
A. vSAN Advanced license or higher
B. vSAN stretched cluster
C. at least six hosts contributing storage
D. deduplication and compression
E. All Flash configuration
Correct Answer: ACE


QUESTION 8
What is the VMware-recommended best practice for Fibre Channel zoning?
A. soft zoning
B. single-initiator-multiple-target zoning
C. single-initiator zoning
D. single-initiator-single-target zoning
Correct Answer: D


QUESTION 9
Which two tasks should a vSphere administrator perform if the vmkernel log reports VMFS metadata errors? (Choose two.)
A. contact VMware technical support
B. reformat the datastore
C. check the device with VOMA
D. ignore the messages
Correct Answer: AC


QUESTION 10
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
Correct Answer: B


QUESTION 11
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?
A. Use a VM-Host affinity rule.
B. Add the VMs to a vApp.
C. Use a VM-VM affinity rule.
D. Place the VMs in different folders.
Correct Answer: C


QUESTION 12
Which three types of Content Libraries exist within vSphere 6.5? (Choose three.)
A. Remote Content Library
B. Published Content Library
C. Local Content Library
D. Shared Content Library
E. Subscribed Content Library
Correct Answer: BCE
Explanation
Explanation/Reference:
Local Libraries
Subscribed Libraries (You subscribe to a published library by creating a subscribed library.)


QUESTION 13
Which statements regarding datastore clusters meets VMware’s recommended best practices?
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).
Correct Answer: B


QUESTION 14
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
Correct Answer: C
Explanation
Explanation/Reference:
In the Web Client interface, you’ll find the firewall configuration under the Security and Services folder of a host profile.


QUESTION 15
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source
and destination host?
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
Correct Answer: B
Explanation
Explanation/Reference:
Round-Trip Time for Long-Distance vMotion Migration If you have the proper license applied to your environment, you can perform reliable migrations between
hosts that are separated by high network round-trip latency times. The maximum supported network round-trip time for vMotion migrations is 150 milliseconds.
This round-trip time lets you migrate virtual machines to another geographical location at a longer distance.


QUESTION 16
A vSphere administrator manages a cluster which includes critical and non-critical virtual machines. The cluster requires different permissions for contractors and
non-contractors.
How can the administrator exclude the contractor group from some of the critical VMs?
A. Apply permission for both contractors and non-contractors on the cluster level.
B. Apply permission for both contractors and non-contractors on the cluster level. Remove permission on the critical VMs for contractors.
C. Remove permission for contractors on the cluster level. Apply permission on the critical VMs for non-contractors.
D. Apply permission for both contractors and non-contractors on the VMs. Remove permission on the critical VMs for contractors.
Correct Answer: B


QUESTION 17
What VM Monitoring setting would ensure that the failure interval for a virtual machine is defined as 120 seconds?
A. High
B. Normal
C. Low
D. Medium
Correct Answer: C


QUESTION 18
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the
Secondary VM is on an overcommitted ESXi host.What two methods will correct the problem? (Choose two.)
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
Correct Answer: BD


QUESTION 19
Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?
A. esxcli network
B. vmkping
C. net-status
D. vicfg-vmknic
Correct Answer: B


QUESTION 20
A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure.
Which statement is true if a fifth host is added?
A. CPU and Memory capacity will be set to 50%.
B. CPU and Memory capacity will be set to 30%.
C. CPU and Memory capacity will be set to 25%.
D. CPU and Memory capacity will be set to 20%.
Correct Answer: D


QUESTION 21
Which two configuration options can exclude virtual disks from snapshot operations? (Choose two.)
A. Use RDM in virtual mode for virtual disk.
B. Use virtual disks in Independent ?Persistent mode.
C. Use a virtual disk larger than 2 TB in size.
D. Use RDM in physical mode for virtual disk.
Correct Answer: BD


QUESTION 22
Which statement is correct when migrating from a Windows vCenter Server to the vCenter ServerAppliance 6.5?
A. Migration deployments do not migrate local OS users from the source vCenter Server.
B. Migration deployments support DHCP on the source vCenter Server.
C. Migration deployments allow the source vCenter Server to remain powered on afterwards.
D. Migration deployments support custom ports for all services on the source vCenter Server.
Correct Answer: A


QUESTION 23
An administrator sets the Failover Capacity for both CPU and Memory at 25%.
Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?

A. 45%
B. 25%
C. 70%
D. 60%
Correct Answer: A


QUESTION 24
Which two components are part of storage I/O multipathing on ESXi? (Choose two.)
A. SATP
B. VASA
C. PSP
D. VAAI
Correct Answer: AC


QUESTION 25
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on.
The exhibit shows the parent and child resource reservations.

If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.D. VM-K2 will receive resource priority and will be able to power on this scenario.
Correct Answer: A


QUESTION 26
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered.
Which could be causing this?
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
Correct Answer: D
Explanation
Explanation/Reference:
VMFS 6 is the new filesystem of vSphere 6.5. The new filesystem supports 512e advanced format drives and is 4098 sector (4K) aligned. It also supports
automatic UNMAP, which asynchronously tracks freed blocks and sends UNMAPs to backend storage in background.


QUESTION 27
Which feature facilitates the sharing of templates via vCenter Server?
A. Content Library
B. OVF
C. folders
D. vApp
Correct Answer: A


QUESTION 28
Which iSCSI initiator type can be used with any network interface card?
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
Correct Answer: A
Explanation
Explanation/Reference:
Software iSCSI Adapter
A software iSCSI adapter is a VMware code built into the VMkernel. It allows your host to connect to the iSCSI storage device through standard network adapters.
The software iSCSI adapter handles iSCSI processing while communicating with the network adapter. With the software iSCSI adapter, you can use iSCSI
technology without purchasing specialized hardware.


QUESTION 29
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
Correct Answer: C


QUESTION 30
Which are two vCenter Server two-factor authentication methods? (Choose two.)
A. RSA SecurID
B. Smart Card
C. SAML
D. Symantec VIP
Correct Answer: AB
Explanation
Explanation/Reference:
Two-Factor Authentication Methods
The two-factor authentication methods are often required by government agencies or large enterprises.
Smart card authentication
Smart card authentication allows access only to users who attach a physical card to the USB drive of the computer that they log in to. An example is Common
Access Card (CAC) authentication.
The administrator can deploy the PKI so that the smart card certificates are the only client certificates that the CA issues. For such deployments, only smart card
certificates are presented to the user. The user selects a certificate, and is prompted for a PIN. Only users who have both the physical card and the PIN that
matches the certificate can log in.
RSA SecurID Authentication
For RSA SecurID authentication, your environment must include a correctly configured RSA Authentication Manager. If the Platform Services Controller isconfigured to point to the RSA server, and if RSA SecurID Authentication is enabled, users can log in with their user name and token.
See the two vSphere Blog posts about RSA SecurID setup for details

100% valid 2v0-622d Exam questions from Pass4itsure 2v0-622d dump! Welcome to download the latest and 100%
pass guarantee Pass4itsure 2v0-622d VCE and PDF dumps: https://www.pass4itsure.com/2v0-622d.htmlp.s. Latest pass4itsure 2V0-622D exam pdf on Google Drive shared : https://drive.google.com/file/d/121nJaysdTQEjyTUYq1ClSrpeQ9ffTRxq/view