Home » Huawei » h12-211 dumps pdf » [2021.4] New, Free | Huawei H12-211 Practice Test, Huawei H12-211 Pdf

[2021.4] New, Free | Huawei H12-211 Practice Test, Huawei H12-211 Pdf

Get the newest free complete Huawei H12-211 exam dumps! Go https://www.pass4itsure.com/h12-211.html (Q&As: 571 ). Best 100% valid up-to-date actual Huawei H12-211 dumps that bring you the best results. You can get 100% free updates on Huawei H12-211 practice test questions, Huawei H12-211 pdf here.

[free pdf] Huawei H12-211 pdf download from google drive https://drive.google.com/file/d/12UP4VireQUiSHWSOSr5qDTAC9zm1zUD_/view?usp=sharing

Latest Huawei H12-211 Exam Questions From Youtube

New Huawei H12-211 Practice Test Q1-Q13 Free

QUESTION 1
display startup MainBoard: Startup system software: sd1:/ar2220-v200r003c00spc200.cc Next startup system software:
sd1:/ar2220- v200r003c00spc200.cc Backup system software for next startup: null Startup saved-configuration file: null
Next startup saved-configuration file: null Startup license file: null Next startup license file: null Startup patch package:
null Next startup patch package: null Startup voice-files: null Next startup voice-files: null Refer to the display output.
Which statement is false?
A. The current configuration file has not been saved.
B. The current startup system software is ar2220-v200r003c00spc200.cc
C. The next startup system software cannot be changed.
D. The next startup system software can be changed by using the “startup system software .cc” command.
Correct Answer: C


QUESTION 2
system – view [Huawei]command – privilege level 3 view user save The correct statement about the above configuration
command is ()
A. Modify the user\\’s permission level to 3, and save the configuration.
B. Modify the user view command to a permission level of 3, and save the configuration.
C. Modify the permission level of the save command used by a user to 3
D. Modify the permission level of the save command in the user view to 3
Correct Answer: D


QUESTION 3
The network structure and OSPF partition are shown in the figure. In addition to R1, routers R2, R3 and R4 are OSPF
ABR routers.

h12-211 exam questions-q3

A. Correct
B. Error
Correct Answer: B


QUESTION 4
Two routers are connected via serial interfaces, for which the link-protocol is PPP. The network administrator wishes to
configure PPP authentication to improve security on this link. Which PPP authentication method provides a more secure
solution?
A. CHAP
B. PAP
C. MD5
D. SSH
Correct Answer: A


QUESTION 5
The network administrator wants to improve the performance of network transmission, what steps can the administrator
take? (Choose two)
A. Change the work mode to full duplex of each end station.
B. Link the end stations together using a switch.
C. Change the work mode to half duplex of each end station.
D. Link the end stations together using a hub.
Correct Answer: AB

QUESTION 6
When two switches use link aggregation technology for interconnection, which of the following conditions do each
member port need to meet? (multiple choice)
A. The number of physical ports connected to the two ends is the same.
B. The physical ports connected to the two ends have the same rate.
C. The physical port duplex mode connected to the two ends is the same.
D. The physical numbers of the physical interfaces connected to the two ends are the same.
E. The optical modules used by the physical ports connected to the two ends are of the same type.
Correct Answer: ABC


QUESTION 7
In the OSI reference model, the ability to perform end-to-end error detection and flow control is ().
A. Physical layer
B. Data link layer
C. Network layer
D. Transport layer
Correct Answer: D

QUESTION 8
Source Destination Protocol Info
10.0.12.1 10.0.12.2 TCP 50190 > telnet [SYN] Seq=0 Win=8192 Len=0 MSS=1460 10.0.12.2 10.0.12.1 TCP telnet>
50190 [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 10.0.12.1 10.0.12.2 TCP 50190 > telnet [ACK] Seq=1
Ack=1 Win=8192 Len=0 Refer to the capture output.The administrator has captured three packets in the network. Which
statement regarding the capured packets is incorrect?
A. This packets represent a TCP three-way handshake process.
B. 10.0.12.1 is the telnet server, while 10.0.12.2 is the telnet client.
C. The three packets contain no application data.
D. 10.0.12.1 uses port 50190 to buid the telnet connection.
Correct Answer: B


QUESTION 9
217.# Interface GigabitEthernet0/0/1 Port link type trunk Port trunk allow pass vlan 2 to 4094 #
According to the command output shown above, the correct one in the following description is () (multiple choice)
A. GigabitEthernet0/0/1 does not allow VLAN1 to pass.
B. GigabitEthernet0/0/1 allows VLAN1 to pass
C. If you want to change the GigabitEthernet0/0/1 port to an Access port, you must first use the command “undo port
trunk allow pass vlan All clear the default configuration
D. If you want to change the GigabitEthernet0/0/1 port to an Access port, you must first use the command “undo port
trunk allow pass vlan 2 to 4094″ clear default configuration
Correct Answer: BD

QUESTION 10
As shown in the figure, both ports GE0/0/1 and GE0/0/2 are configured with different Hybrid configurations. The correct
statement is (). (many selected)

h12-211 exam questions-q10

A. The administrative department and the finance department cannot exchange visits because the VLANs belonging to
the two departments are different.
B. The data frame sent by the administrative department carries the tag in the switch as VLAN20.
C. The data frame sent by the finance department carries the tag in the switch as VLAN20.
D. The switch here can be a Layer 2 switch or a Layer 3 switch because communication does not need to go through a
Layer 3 gateway.
E. If both ports GE0/0/1 and GE0/0/2 of the switch are modified to be trunk ports, the two departments can
communicate normally.
Correct Answer: CD

QUESTION 11
Refer to the following topology and router configuration. The NAT configuration does not specify a NAT global address
pool, so address translation cannot be performed correctly.

h12-211 exam questions-q11

A. Yes
B. Wrong
Correct Answer: B


QUESTION 12
Which of the following statements regarding link-state database and routing table of a “single” OSPF area are correct?
(Choose two)
A. The link-state databases that all routers build are identical.
B. The link-state databases that all routers build are different.
C. The routing-tables that all routers calculate are different.
D. The routing-tables that all routers calculate are identical.
Correct Answer: AC


QUESTION 13
It is known that the routing table of a router has the following two entries. If the router wants to forward packets with the
destination address of 9.1.4.5, the following is said. The correct thing in the law is ().

h12-211 exam questions-q13

A. Select the first item as the best match because the OSPF protocol has a higher priority.
B. Select the second item as the best match because the RIP protocol has a lower value.
C. Select the second item as the best match because the exit is Ethternet0, which is faster than Serial 0.
D. Select the second term as the best match because the route entry is a more accurate match for the destination
address 9.1.4.5
Correct Answer: D

Huawei H12-211 PDF Free Download

Huawei H12-211 pdf 100% free https://drive.google.com/file/d/12UP4VireQUiSHWSOSr5qDTAC9zm1zUD_/view?usp=sharing

Pass4itsure Special Discount Share:

Pass4itsure Huawei exam 15% discount with coupon: HUAWEI

Finish:

Free share latest Huawei H12-211 pdf, Huawei H12-211 practice questions, Huawei H12-211 exam video!

Latest Huawei H12-211 questions answers in order to lead every candidate towards a brighter and better future. Select https://www.pass4itsure.com/h12-211.html to get complete Huawei H12-211 dumps practice exam questions and answers. Wish you success!

Huawei H12-211 pdf free download https://drive.google.com/file/d/12UP4VireQUiSHWSOSr5qDTAC9zm1zUD_/view?usp=sharing

Categories

Latest Microsoft Dumps Exam

Latest CompTIA Dumps Exam

Latest Cisco Dumps Exam

HOT Cisco 200-301 Braindumps ⇨ PDF & VCE
HOT Cisco 350-401 Braindumps ⇨ PDF & VCE
HOT Cisco 300-410 Braindumps ⇨ PDF & VCE
HOT Cisco 300-415 Braindumps ⇨ PDF & VCE
HOT Cisco 300-420 Braindumps ⇨ PDF & VCE
HOT Cisco 300-425 Braindumps ⇨ PDF & VCE
HOT Cisco 300-430 Braindumps ⇨ PDF & VCE
HOT Cisco 300-435 Braindumps ⇨ PDF & VCE
HOT Cisco 350-801 Braindumps ⇨ PDF & VCE
HOT Cisco 300-810 Braindumps ⇨ PDF & VCE
HOT Cisco 300-815 Braindumps ⇨ PDF & VCE
HOT Cisco 300-820 Braindumps ⇨ PDF & VCE
HOT Cisco 300-835 Braindumps ⇨ PDF & VCE
HOT Cisco 350-601 Braindumps ⇨ PDF & VCE
HOT Cisco 300-610 Braindumps ⇨ PDF & VCE
HOT Cisco 300-615 Braindumps ⇨ PDF & VCE
HOT Cisco 300-620 Braindumps ⇨ PDF & VCE
HOT Cisco 300-625 Braindumps ⇨ PDF & VCE
HOT Cisco 300-635 Braindumps ⇨ PDF & VCE
HOT Cisco 350-701 Braindumps ⇨ PDF & VCE
HOT Cisco 300-710 Braindumps ⇨ PDF & VCE
HOT Cisco 300-715 Braindumps ⇨ PDF & VCE
HOT Cisco 300-720 Braindumps ⇨ PDF & VCE
HOT Cisco 300-725 Braindumps ⇨ PDF & VCE
HOT Cisco 300-730 Braindumps ⇨ PDF & VCE
HOT Cisco 300-735 Braindumps ⇨ PDF & VCE
HOT Cisco 350-501 Braindumps ⇨ PDF & VCE
HOT Cisco 300-510 Braindumps ⇨ PDF & VCE
HOT Cisco 300-515 Braindumps ⇨ PDF & VCE
HOT Cisco 300-535 Braindumps ⇨ PDF & VCE
HOT Cisco 350-901 Braindumps ⇨ PDF & VCE
HOT Cisco 300-910 Braindumps ⇨ PDF & VCE
HOT Cisco 300-915 Braindumps ⇨ PDF & VCE
HOT Cisco 300-920 Braindumps ⇨ PDF & VCE
HOT Cisco 500-450 Braindumps ⇨ PDF & VCE
HOT Cisco 500-440 Braindumps ⇨ PDF & VCE
HOT Cisco 600-660 Braindumps ⇨ PDF & VCE
HOT Cisco 200-201 Braindumps ⇨ PDF & VCE
HOT Cisco 100-490 Braindumps ⇨ PDF & VCE
HOT Cisco 010-151 Braindumps ⇨ PDF & VCE
HOT Cisco 200-901 Braindumps ⇨ PDF & VCE