https://www.pass4itsure.com/ccnp-collaboration.html Learning without practical experience is worthless in IT industry, as well as cause of poor confidence for struggling candidates. Lead4sure presents the finest set of CCNP Collaboration 300-075 practice test for IT professionals to consolidate their learning and assist them pass the Cisco certification exam. Lead4sure study materials for CCNP Collaboration 300-075 test are well written by our Top Experts to keep highest standards of writing of Cisco 300-075 exam. Lead4sure 300-075 Cisco CCNP Collaboration exam questions offers 100% Guarantee to pass your CCNP Collaboration 300-075 Exam. After purchasing 300-075 Cisco CCNP Collaboration exam questions, you are just a step away from testing for Cisco certification.
It is Lead4sure cisco 200-125 ccna pdf that gives you confidence to pass this certification exam in first attempt and with maximized score. Apart from general information and study tips, you can find also websites which contain actual questions like questions answers and study material. Passing Exam is one way to prove you have professional knowledge of IT industry. It is certainly not an easy task to do, but here the 300-075 dumps with the help of our will ensure and encourage that the certification CCNP Collaboration 300-075. It will save your time and money, making you successful in exam too. That’s correct; the cost for literally cheating on your 300-075 tutorial materials is loss of reputation.
Thinking to expand your knowledge base with Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam and widen the horizon for career opportunities? Pondering over Cisco 300-075 exam to increase your market value? If yes then you certainly qualify for earning the Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certification designed to enhance the knowledge and skills gained for a particular technology and system. The 300-075 exam is designed and developed to validate a person’s skillset. Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) constantly changes and demands that professionals must update their knowledge with current methods and techniques to perform better at their respective jobs.
How to create your 300-075 Cisco CCNP Collaboration exam questions assessment good? When can usually get the newest 300-075 pdf facts in addition to 300-075 Cisco CCNP Collaboration exam questions process inquiries? The majority of candidates could be concerned about numerous inquiries. Lead4sure is best website supplying the newest 300-075 Cisco CCNP Collaboration exam questions examine resources. These are the main objectives of the Cisco 300-075 exam certification. The first try in qualifying for the Cisco 300-075 exams is not simple. The certification exam composed of multiple choice question and some case studies. You have to place a lot of efforts in studying to qualify for the Implementing Cisco IP Telephony & Video, Part 2 v1.0 exam with excellent marks. However, now with Lead4sure real 300-075 exam questions and answers in 300-075 Cisco CCNP Collaboration exam questions, you can pass this exam easily.
Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) is a significant and widely preferred certification for IT professionals and experts. 300-075 vce valuable credential will let you grab appreciation and applause from employers and organizations but preparing for 300-075 is not an easy task. One has to master the skills and abilities to manage and execute the technology and this can only be done by purchasing Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) study resource that covers all major aspects of the exam. Candidates must join an online Cisco CCNP Collaboration resource site that helps them prepare for the Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) in a better and professional way.
Read More:http://www.microsoft-technet.com/cisco-200-105-pdf-with-quick-learning-exam-samples.html
Kill4exam Cisco 400-101 exam questions and answers in PDF are prepared by our expert, Moreover,they are based on the recommended syllabus covering all the Cisco 400-101 exam objectives.You will find them to be very helpful and precise in the subject matter since all the Cisco 400-101 pdf is regularly updated and has been checked for accuracy by our team of Microsoft expert professionals. https://www.pass4itsure.com/400-101.html
QUESTION 31
Which two Cisco Express Forwarding tables are located in the data plane? (Choose two.)
A. the forwarding information base
B. the label forwarding information base
C. the IP routing table
D. the label information table
E. the adjacency table
Correct Answer: AB Explanation
Explanation/Reference: http://www.pass4cert.net/70-480-dumps-download.html
The control plane runs protocols such as OSPF, BGP, STP, LDP. These protocols are needed so that routers and switches know how to forward packets and
frames.
The data plane is where the actual forwarding takes place. The data plane is populated based on the protocols running in the control plane. The Forwarding
Information Base (FIB) is used for IP traffic and the Label FIB is used for MPLS.
QUESTION 32
Which option is the most effective action to avoid packet loss due to microbursts?
A. Implement larger buffers.
B. Install a faster CPU.
C. Install a faster network interface.
D. Configure a larger tx-ring size.
Correct Answer: A Explanation
Explanation/Reference:
You can’t avoid or prevent them as such without modifying the sending host’s application/network stack so it smoothes out the bursts. However, you can manage microbursts by tuning the size of receive buffers / rings to absorb occasional microbursts.
QUESTION 33
Which two statements about packet fragmentation on an IPv6 network are true? (Choose two.)
A. The fragment header is 64 bits long.
B. The identification field is 32 bits long.
C. The fragment header is 32 bits long.
D. The identification field is 64 bits long.
E. The MTU must be a minimum of 1280 bytes.
F. The fragment header is 48 bits long.
Correct Answer: AB Explanation cisco-200-125 ccna pdf
Explanation/Reference:
The fragment header is shown below, being 64 bits total with a 32 bit identification field: Reference: http://www.openwall.com/presentations/IPv6/img24.html
QUESTION 34
You are backing up a server with a 1 Gbps link and a latency of 2 ms. Which two statements about the backup are true? (Choose two.)
A. The bandwidth delay product is 2 Mb.
B. The default TCP send window size is the limiting factor.
C. The default TCP receive window size is the limiting factor.
D. The bandwidth delay product is 500 Mb.
E. The bandwidth delay product is 50 Mb.
Correct Answer: AC Explanation Explanation/Reference:
1 Gbps is the same as 1000 Mbps, and 1000Mb x .0002 = 2 Mbps. With TCP based data transfers, the receive window is always the limiting factor, as the sender is generally able to send traffic at line rate, but then must wait for the acknowledgements to send more data.
QUESTION 35
Which two pieces of information does RTCP use to inform endpoint devices about the RTP flow? (Choose two.)
A. the transmitted octet
B. the lost packet count
C. session control function provisioning information
D. the CNAME for session participants
E. the authentication method
F. MTU size changes in the path of the flow Correct Answer: AB
Explanation Explanation/Reference:
RTCP transports statistics for a media connection and information such as transmitted octet and packet counts, packet loss, packet delay variation, and round-trip delay time. An application may use this information to control quality of service parameters, perhaps by limiting flow, or using a different codec.
QUESTION 36
How many hash buckets does Cisco Express Forwarding use for load balancing?
A. 8
B. 16
C. 24
D. 32
Correct Answer: B Explanation Explanation/Reference:
In order to understand how the load balance takes place, you must first see how the tables relate. The Cisco Express Forwarding table points to 16 hash buckets (load share table), which point to the adjacency table for parallel paths. Each packet to be switched is broken up into the source and destination address pair and checked against the loadshare table.
QUESTION 37
Which three features require Cisco Express Forwarding? (Choose three.)
A. NBAR
B. AutoQoS
C. fragmentation
D. MPLS
E. UplinkFast
F. BackboneFast
Correct Answer: ABD Explanation Explanation/Reference: http://www.certadept.com/cisco-200-125-exam-with-our-dumps-pdf-vce-free-try.html
Recognition.
QoS Features That Require CEF These class-based QoS features are supported only on routers that run CEF. Network Based Application Recognition (NBAR) provides intelligent network classification. For more information, refer to Network Based Application
The AutoQoS -VoIP feature simplifies and speeds up the implementation and provisioning of QoS for VoIP traffic. This feature is enabled with the help of the
auto qos voip command. CEF must be enabled at the interface or ATM PVC before the auto qos command can be used. For more information about this feature and its prerequisites, refer to AutoQoS – VoIP.
From MPLS Fundamentals – Luc De Ghein Why Is CEF Needed in MPLS Networks? Concerning MPLS, CEF is special for a certain reason; otherwise, this book would not explicitly cover it. Labeled packets that enter the router are switched according to the label forwarding information base (LFIB) on the router. IP packets that enter the router are switched according to the CEF table on the router. Regardless of whether the packet is switched according to the LFIB or the CEF table, the outgoing packet can be a labeled packet or an IP packet
QUESTION 38
Which two options are interface requirements for turbo flooding? (Choose two.)
A. The interface is Ethernet.
B. The interface is configured for ARPA encapsulation.
C. The interface is PPP.
D. The interface is configured for GRE encapsulation.
E. The interface is configured for 802.1Q encapsulation.
Correct Answer: AB Explanation Explanation/Reference: http://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/ccie-routing-switching.html
In the switch, the majority of packets are forwarded in hardware; most packets do not go through the switch CPU. For those packets that do go to the CPU, you can speed up spanning tree-based UDP flooding by a factor of about four to five times by using turbo-flooding. This feature is supported over Ethernet interfaces configured for ARPA encapsulation.
swiprout.html
QUESTION 39
Which three options are sub-subfields of the IPv4 Option Type subfield? (Choose three.)
A. Option Class
B. GET
C. Copied
D. PUSH
E. Option Number
F. TTL
Correct Answer: ACE Explanation Explanation/Reference:
Each IP option has its own subfield format, generally structured as shown below. For most options, all three subfields are used. Option Type, Option Length and Option Data.
Cisco 400-101 dumps and answers in PDF are prepared by our expert, Moreover, they are based on the recommended syllabus covering all the Cisco 400-101 exam objectives.You will find them to be very helpful and precise in the subject matter since all the Cisco 400-101 vce is regularly updated and has been checked for accuracy by our team of Microsoft expert professionals. https://www.pass4itsure.com/400-101.html
QUESTION 7
An administrator group is looking to on-board multiple users with Cisco Unified Communications Manager at one time. Which option should be used?
A. Bulk Administration Tool
B. Product Upgrade Tool
C. Command Lookup Tool
D. Cisco Unified Communications Manager User Options Page
E. Cisco Upload Tool
Correct Answer: A QUESTION 8
A user wants their name to show on their phone instead of their directory number. Which configuration item allows an administrator to do this?
A. Line Text Label
B. Alerting Name
C. External Phone Number Mask
D. Caller Name
E. Description
Correct Answer: A
QUESTION 9
A user would like all calls to be forwarded to voice mail. The user’s phone is not set up with a soft key for this feature. Which option accomplishes this configuration from within the Cisco Unified Communication Administrator Directory Number configuration page?
A. Call Forward and Pickup Settings > Forward No Coverage External > Select voice mail check box
B. Call Forward and Pickup Settings > Forward Busy External > Select voice mail check box
C. Call Forward and Pickup Settings > Forward All > Select voice mail check box
D. Call Forward and Pickup Settings > Forward Unregistered External > Select voice mail check box
Correct Answer: C
QUESTION 10
A new user has successfully registered Cisco Jabber. Which option verifies that the Jabber client is connected to all appropriate back-end systems?
A. Show Connection Status
B. Report A Problem
C. Advanced Settings
D. About Jabber
E. Reset Jabber
Correct Answer: A
QUESTION 11
Use the exhibits below to answer the question.
Pass4cert give our CCNA Collaboration CICD 210-060 study guide at reasonable prices for your own convenience. Try our CCNA Collaboration CICD 210-060 study guide today. There are many ways to prepare for your 210-060 Certification Exam. Our CCNA Collaboration CICD 210-060 pdf includes 210-060 test questions, 210-060 practice exam, 210-060 Practice Testing Software. We will meet the needs of all about IT certification in Pass4cert. With the mushroom growth of many related softwares, it has almost become impossible to find out a study material which deepens your knowledge and guides you properly.
Cisco 210-060 exam candidates all know the 210-060 pdf exam is not easy to pass. But it is also the only way to success, so they have to choose it. In order to improve the value of your career, you must pass this certification exam. The CCNA Collaboration CICD 210-060 pdf designed by Passcert contain different targeted, and have wide coverage. There is no any other books or other information can transcend it. The CCNA Collaboration CICD 210-060 study guide provided by Pass4cert definitely ace exam questions and answers that help you pass the exam.
Read More: http://www.pass4cert.net/free-cisco-352-001-pdf-download.html
http://www.certadept.com/cisco-200-125-exam-with-our-dumps-pdf-vce-free-try.html
Welcome to download the newest Pass4itsure 70-470 dumps
FLYDUMPS Cisco 642-384 is to start from the basics, then gradually deepening the focus on the content of the curriculum, which generally takes a lot of study time. You are probably also hesitant; after all, to participate in the Cisco 642-384 exam, it takes a lot of time and money. However, once choose FLYDUMPS Cisco 642-384 exam sample questions, you can save both time and money in your Cisco 642-384 exam. FLYDUMPS provide a convenient way to learn. FLYDUMPS Cisco 642-384 exam sample questions can help you quickly through Cisco 642-384 exam. By way of simulation questions, FLYDUMPS Cisco 642-384 exam sample questions help you understand all test points, and includes multiple-choice questions and experimental operation part of the Cisco 642-384 exam.
QUESTION 132
Which command assigns a cost value of “17” to a switch port?
A. spanning-tree interfacefastethernet 5/8 17
B. spanning-treeportcost 17
C. spanning-treeportcost 17
D. spanning-treevlan 1 cost 17
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 133
You have configured and applied a Cisco IOS Firewall access rule to the inbound, untrusted interface. You suspect that the rule may be blocking necessary traffic onto the network. What must you do to delete that rule when using Cisco Router and Security Device Manager?
A. Select ACL Editor > Access Rules to delete the rule.
B. You must remove the association between the rule and the interface before deleting the rule
C. You must delete the associated access list on the interface, then reconfigure the access list as required, and then reapply the access group to the proper interface.
D. Go to the Edit Firewall Policy tab to delete the rule.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 134
A customer in Europe needs to establish an 11-Mbps wireless bridge link between two office buildings that are approximately 1.3 km apart. The wireless link will pass through a public park, which contains a lake that is surrounded by trees. You run the range calculation and determine that the Cisco Aironet 1300 Series Outdoor Access Point/Bridge should work. You install the link using 10.5-dB yagis with 75 feet of standard Cisco cabling and both radios set at 20 mW. The wireless bridges are not able to establish or maintain a link.
What is needed to successfully complete this link?
A. An amplifier needs to be installed at one of the sites.
B. The antenna must be raised high enough to clear the trees
C. Lower loss cabling needs to be used to bring the EIRP into legal limits.
D. Due to the trees, a 21-dBi dish needs to be used for its narrower beam width.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 135
You connect via Telnet to a Cisco access point and enter the command show dot11 link test. Which output might you obtain?
A. signal-to-noise ratio
B. incoming and outgoing signal strength
C. TX packets dropped
D. RX packets per second
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 136
Refer to the exhibit. The tables contain information from the Cisco Router and Security Device Manager configurations of Router A and Router B. Traffic between Host 1 and Host 2 is not successfully establishing the sitE.to-site VPN between Router A and Router B.
What is the mostly likely cause of this fault?
A. Router A is using a standard IP ACL (100-149) while Router B is using a Turbo ACL (150-199).
B. The IKE encryption methods on the two routers are different
C. the IPSec policy map names on the two routers are different.
D. the IPSec rules on the two routers are not permitting the Answer: interesting traffic.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 137
This item consists of one or more multiple choice type questions that you must answer. To answer these questions, you need to use a GUI tool that becomes fully accessible by the use of the labs you see below these directions. The tabs have up and down arrows to signal the direction that the tabbed window may be dragged lo expose or hide the GUI tool. When you are done using the GUI tool, you may drag the tab down to continue answering questions. To advance to the next question in the series, click on the numbered button to the left of each question. Make sure that you have answered all the questions before continuing to the next item.
How many active VPN clients are currently connected to the 1841 ISR router?
A. 0
B. 1
C. 2
D. 3
E. 4
F. 5
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 138
This item consists of one or more multiple choice type questions that you must answer. To answer these questions, you need to use a GUI tool that becomes fully accessible by the use of the labs you see below these directions. The tabs have up and down arrows to signal the direction that the tabbed window may be dragged lo expose or hide the GUI tool. When you are done using the GUI tool, you may drag the tab down to continue answering questions. To advance to the next question in the series, click on the numbered button to the left of each question. Make sure that you have answered all the questions before continuing to the next item.
Which IP address or address range will be used when allocating an internal IP address to the VPN clients
for the “test” VPN group?________________________________________________________________________
A. 10.1.1.100 to 10.1.1.200 I
B. 10.1-1.2 to 10.1.1.254
C. 192.168.1.1 to 192.168.1.100
D. 192.168.1.2 to 192.168.1.254
E. 192.168.1.1
F. 192.168.1.2
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 139
This item consists of one or more multiple choice type questions that you must answer. To answer these questions, you need to use a GUI tool that becomes fully accessible by the use of the labs you see below these directions. The tabs have up and down arrows to signal the direction that the tabbed window may be dragged lo expose or hide the GUI tool. When you are done using the GUI tool, you may drag the tab down to continue answering questions. To advance to the next question in the series, click on the numbered button to the left of each question. Make sure that you have answered all the questions before continuing to the next item.
Which authentication method is used by the test” VPN group?
A. RSA Encrypted Nounce
B. RSA Digital Signature
C. PrE.Shared Key
D. Digital Certificate
E. DH2
Correct Answer: C Section: (none) Explanation
Explanation/Reference: QUESTION 140
You are the network consultant. You have a customer with a small network of 15 remote sites is trying to optimize its VPN by migrating some remote sites using Frame Relay connections to the Internet to using cable connections to the Internet. The keypoint for your customer is to save money. Only a moderate amount of IP traffic is passing through the network, most of which is from the remote sites to the central site. IPSec should be used to provide VPN functionality and basic confidentiality is desired..Considering the above requirements. Which solution would be the easiest for this customer to set up and manage?
A. point-to-point
B. partial mesh
C. point-to-multipoint
D. hub-and-spoke
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 141
In an infrastructure based on a wireless advanced feature set using lightweight access points, by which method is a rogue contained?
A. The WCS sends excessive traffic to the rogue thus overloading the access point.
B. The rogue MAC address is used to spoof broadcastdeassociation packets.
C. The rogue MAC address is used to spoof broadcastdeauthentication packets.
D. The WCS sends out excessive signals on the same channel when the rogue is detected.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 142
With industry-leading services and performance, the Cisco Catalyst 6500 Series Switch is Cisco’s flagship switching solution. It delivers the most comprehensive feature sets for core, distribution, wiring closet, data center, enterprise WAN routing, and Metro-Ethernet deployments. Which layer you think is recommended that the Cisco Catalyst 6500 Series WLSM be placed?
A. core
B. distribution
C. access
D. presentation
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 143
The Cisco Lifecycle Services approach defines the activities needed to help you successfully deploy and operate Cisco technologies and optimize their performance throughout the lifecycle of your network. Which statement is an accurate list of Cisco Lifecycle Services phases?
A. initiation, prepare, plan, design, implement, operate, and optimize
B. site assessment, risk assessment, solution selection and acquisition, testing, and operations
C. prepare, plan, design, implement, operate, and optimize
D. deployment, testing, implementation, and production
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 144
Which IP address or address range will be used when allocating an internal ip address to the VPN client for the test
A. 120.1.1.100 to 10.1.1.200
B. 10.1.1.2 to 10.1.1.254
C. 192.1681.1 to 192.1681.1.100
D. 192.1681.2 to 192.1681.1.254
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 145
Which authentication method is used by the test VPN group?
A. RSA EncryptedNounce
B. RSA Digital Signature
C. Pre-shared key
D. DH2
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 146
A network administrator is troubleshooting an EIGRP connection between RA and RB. Given the debug output on RA, which two statements are true?(Choose two)
A. RA received a hello packet with mismatched hello timers.
B. RA received a hello packet with mismatched metric-calculation mechanisms.
C. RA will form an adjacency with RB.
D. RAwill not form an adjacency with RB.
Correct Answer: BD Section: (none) Explanation
Explanation/Reference:
QUESTION 147
You are the network administrator. There is one Gigabit Ethernet port on the Cisco CE520 used in the Smart Business Communications System. Which port role assignment would you make for?
A. Cisco Express 520
B. Cisco UC520
C. Cisco CE520
D. Cisco 871W
Correct Answer: B Section: (none) Explanation Explanation/Reference:
QUESTION 148
Refer to the exhibit. CK-SA and CK-SC are running PVST+ STP, and CK-SB is running 802.1 Q STP. If the BPDU of the root in VLAN 1 is better than the BPDU of the root in VU\N 2, then there is no blocking port in the VLAN 2 topology. The BPDU of VU\N 2 never makes a “full circle” around the topology; it is replaced by the VLAN 1 BPDU on the CK-SB-CK-SC link, because CK-SB runs only one STP merged with VU\N 1 STP of PVST+. Thus, there is a forwarding loop.
What does PVST+ do to correct this?
A. CK-SA sends PVST+ BPDUs ofVLAU 2 (to the SSTP address that is flooded by CK-SB) towards CK-SC. CK-SC will put port CK-SC-CK-SB into a type-inconsistent state, which prevents the loop.
B. CK-SB sends PVST+ BPDUs of VU\N 1 (to the SSTP address that is flooded by CK-SA) towards CK-SC. CK-SC will put port CK-SC-CK-SB into a type-inconsistent state, which prevents the loop.
C. CK-SC sends PVST+BPDUsofVU\N 2 (to the SSTP address that is flooded by CK-SB) towards CK-SC. CK-SAwill put port CK-SC-CK-SB into a type-inconsistent state, which prevents the loop.
D. CK-SA sends PVST+ BPDUs of VU\N 1 (to the SSTP address that is flooded by CK-SB) towards CK-SB. CK-SA will put port CK-C-CK-B into a type-inconsistent state, which prevents the loop.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 149
A wireless autonomous 1200 access point running core feature set in root mode has its SSID set to Factory_floor and provides connection to a repeater access point with its SSID set to factory_floor, if the root-mode access point is using channel 11 which channel will the repeater access point use?
A. channel 11
B. channel 1 or 6
C. anynonoverlapping channel
D. The root access point and the repeater will negotiate this setting
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 150
The VPN server uses a preshared key for remote device authentication
A. TRUE
B. FALSE
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 151
A customer with a large enterprise network wants to allow employees to work from home over the Internet. The customer anticipates a large amount of traffic, predominantly toward the central site. The customer also requires a VPN using strong user authentication and encryption to protect highly sensitive data. Which solution best meets this customer’s requirements?
A. remote-access VPN with software encryption
B. remote-access VPN with hardware encryption
C. site-to-site VPN with hub-and-spoke tunnels using 3DES and pre-shared secrets
D. site-to-site Cisco Easy VPN
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 152
The tables contain information from the Cisco Router and Security Device Manager configurations of RA and RB. Traffic between PC1 and PC2 is not successfully establishing the site-to-site VPN between -RA and -RB. What is the mostly likely cause of this fault?
A. RAis using a standard IP ACL (100-149) while RB is using a Turbo ACL(150-199).
B. The IPSec encryption methods used by each router do not match.
C. The D-H Group settings on the two routers are the same.
D. The IPSec rules on the two routers are not permitting the correct interesting traffic.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 153
You are the network consultant. When will you assess a customer’s current network infrastructure?
A. plan
B. design
C. operate
D. optimize
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 154
A client is experiencing lower throughput and more packet retransmits is one area of the wireless network. At these times, the client utility shows high signal strength but low signal quality. What may be causing this issue?
A. The client does not support Cisco Compatible Extensions version 2.
B. Diversity is not enabled in the access point.
C. The WDS is failing to register the client card in the WLSM.
D. The channel is set incorrectly in the access point or in the client configuration.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 155
Which statement is correct about the current address translation configurations on the security appliance?
A. Dynamic NAT is used to translate the 10.0.1.100 host on the inside interface to a global address of
192.168.1.1
B. Port AddressTranslation(PAT) is used to translate any host on the inside interface to the 192.168.1.100 global address.
C. Static NAT is used to translate the 172.16.1.2 host on thedmzl interface to a global address of
192.168.1.102
D. Dynamic NAT is used to translate any host ondmzl and dmz2 interfaces to a mapped address from the address from the address pool of 192.168.1.110 to 192.168.1.250
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 156
VLAN Hopping is one of the primary VLAN based attacks used by hackers to infiltrate network security. VLAN hopping is used to attack a network by sending packets to a port which is generally not accessible. VLAN hopping attacks are mainly conducted in the Dynamic Trunking Protocol and, in some cases; the attacks are targeted to the trunking encapsulation protocol (802.1 q or ISL).You worry about the switched infrastructure in an integrated network is vulnerable to VLAN hopping attacks. Which two configuration can be used to mitigate VLAN hopping? (Choose two.)
A. switchporttrunk encapsulation
B. switchport mode trunk
C. switchport access vlan
D. switchport mode access
Correct Answer: CD Section: (none) Explanation
Explanation/Reference:
QUESTION 157
CiscoWorks SNMS is a part of the CiscoWorks family of products for managing small to large networks. CiscoWorks SIMMS is a new Web-based network management solution for small to medium-sized businesses, with 40 or fewer Cisco internetworking devices such as switches, routers, hubs, and access servers. CiscoWorks SNMS can also monitor third-party IT assets such as servers, applications, services, and printers A Public Switched Telephone Network (PSTN) trunk is typically the voice interconnect between any business and the outside world. Which network management tool is designed to allow businesses to manage up to 40 devices?
A. CiscoWorks Unrestricted
B. CiscoWorks WAN Management
C. CiscoWorks LAN Management
D. CiscoWorks SNMS
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 158
Which statement is correct about the information in the Cisco Adaptive Security Device Manager General and License Information screen?
A. The security appliance supports active/active failover only.
B. The security appliance supports 3DES-AES only.
C. The managed device is a Cisco ASA 5540 Security Appliance with VPN premium license enabled.
D. The managed device is Cisco PIX515E Security Appliance.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 159
Which three are different types of STP inconsistencies in a Layer 2 network?(Choose three)
A. MAC inconsistency
B. Root inconsistency
C. EtherChannel inconsistency
D. type inconsistency
Correct Answer: BCD Section: (none) Explanation Explanation/Reference:
QUESTION 160
According to the error log, VLAN 1 is where the BPDU was received, and VLAN 2 is where the BPDU originated. When inconsistency is detected, what happens?
A. VLAN 1 is blocked, while VLAN 2 is forwarding
B. VLAN1 is blocked, while VLAN 2 is listening
C. Both VLANs are listening on the port from which this BPDU is send
D. Both VLANs are blocked on the port from which this BPDU is received
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 161
Which is the current configured default gateway IP address on the security appliance?
A. 172.16.10.1
B. 172.16.1.1
C. 192.168.1.2
D. 10.0.1.1
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 162
Which statement is true about a Cisco Aironet 350 Series wireless client when its green LED appears to be off and its amber LED is blinking?
A. The client adapter is scanning for a network.
B. The client adapter is in ad hoc mode.
C. The client adapter is performing a self-test.
D. The client adapter is in power-save mode.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 163
You are the Cisco Configuration Assistant. Your IT Manager tells you 802.11b telephone can receive an audio signal from an access point, but cannot send audio. What is the most likely reason?
A. The value of RSSI telephone is greater than 30.
B. The access point only receives 802.11g data rates.
C. The security settings in the telephone mismatch the access point.
D. The telephone transmit power is significantly lower than the t the access point
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
Flydumps.com provides you with the most reliable practice exams to master Cisco 642-384 Certification. Our Microsoft questions and answers are certified by the senior lecturer and experienced technical experts in the Microsoft field. These test questions provide you with the experience of taking the Cisco 642-384 actual test.
Welcome to download the newest Pass4itsure CISSP-ISSEP dumps:
https://www.pass4itsure.com/issep.html
http://www.i-tec.org/avaya-3102-certification-exam-best-quality-avaya-3102-exam-dumps-with-the-knowledge-and-skills/
